Creone KeEYBOX KEYRACK KEYWIN5 Manuale di installazione - Pagina 17
Sfoglia online o scarica il pdf Manuale di installazione per Serrature Creone KeEYBOX KEYRACK KEYWIN5. Creone KeEYBOX KEYRACK KEYWIN5 19.
Stampa la pagina
RFID reader
Data +
7
Data -
GND
12-15 V
C
NC
NO
If the RFID reader not is connected from the factory, follow the instructions below
1.
Mount the RFID reader on the service door of the cabinet.
2.
Connect the four cables according to the diagram above.
3.
Log in to the configuration menu with the service PIN
(default 1234#). See page 9 in these instructions.
4.
Use the arrows to navigate to "Select Card Reader Type".
Choose the correct type.
5.
To test the reader, go down to "Test Card reader" and
1
4
5
8
9
3
2
6
swipe your card in front of the reader. If everything is cor-
rectly installed, you will hear a sound and see a number
on the display. This is the ID number of the badge and
the number that should be entered on the correct user
profile in the KeyWin5 software to open the cabinet with
the badge. See more information on this in the Keywin5
manual which you can find on the USB box.
10