Archos DVR 20 Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per DVR Archos DVR 20. Archos DVR 20 13. Digital video recorder for archos jukebox multimedia (jbm 20) and for archos video av 100 and 300 series

Stampa la pagina

Using the Remote Control

The remote control must be pointed to the correct side of the DVR in order to work properly.

5.1

Selecting the Correct Code

Some remote controls use different codes than others. If the remote does

not seem to work at first, try changing the code to either 0, 1 or 2.

For AV300: Setup > System > Remote Control

For JBM 20 & AV 100 series: Setup > Settings > Remote Control

5.2

Correlation to Jukebox Multimedia or AV300 buttons

The remote control works like the buttons on your Jukebox Multimedia or AV300 product. Each

button of the remote control correlates to a button on the device as shown below.

* The ON button on the remote control is used for selection. It will not turn on a device which is off.

Using the Timers on the AV300

If you would like to make a video recording for a future date or time, you can use the timer

function. You can find it by going to VideoCorder > Settings > Set Timer. You can program up

to five different recordings. Once you program your dates and times of recording, you MUST

leave the device in the pre-record state. Otherwise, it will not make the timer recording. It will

not auto shut-off while waiting to make a timer recording. Once the timer is set, you will see an

icon on the top status bar indicating that it is set to make a timed recording.

•

Click on Settings.

•

Select Set timer.

•

Set each line to the desired date and time and then click on Set.

•

Leave the Archos unit in the pre-record screen. Timer icon indicates timers are set.

Three timers being programmed

Notes about setting the timers.

If the end time is earlier than the start time, then it is assumed that you start recording on the

start date, and the recording ends on the following day at the end time. For example, the third

programmed timer in the screenshot above will start recording on the 5

and end on the 6

day of the month.

If you are using the Archos unit on the day of a timer setting and go to the pre-record screen

after the start time of one of the timers, it will start recording if you are still within the

recording time window. It will erase each of the programmed timers if you arrive at the pre-

recording screen after the End time of any of your timer settings.

Timers after first recording finished

day of the month,