Cres Cor CO151X185B-Q1 Manuale di installazione, funzionamento e manutenzione - Pagina 6

Sfoglia online o scarica il pdf Manuale di installazione, funzionamento e manutenzione per Forno a convezione Cres Cor CO151X185B-Q1. Cres Cor CO151X185B-Q1 13. Convection and retherm ovens with microprocessor controls
Anche per Cres Cor CO151X185B-Q1: Manuale di installazione, funzionamento e manutenzione (13 pagine)

Stampa la pagina
Ovens with
Microprocessor Controls
Rev. 10 (6/08)
WARNING
BEFORE
cleaning the cabinet:
1.
Unplug cord from wall. Allow cabinet to
cool.
2.
Do NOT hose cabinet with water.
3.
Do NOT get water on controls.
4.
Do NOT use abrasives or harsh
chemicals.
Wipe up spills as soon as possible.
Clean regularly to avoid heavy dirt build-up.

HOW TO CLEAN THE UNIT:

SOIL
ROUTINE CLEANING
CABINET
STUBBORN SPOTS,
STAINS
Inside and Outside
BURNT ON FOODS OR
GREASE
(Stainless Steel)
HARD WATER SPOTS &
SCALE
WARNING
IF UNIT GETS TOO HOT OR WON'T SHUT OFF, DISCONNECT
POWER AT BRANCH PANEL. DO NOT UNPLUG CORD!
1. Cord is unplugged from wall outlet.
2. Circuit breaker/fuse to wall outlet is blown.
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
FL-2269
Page 6 of 13
OPERATING INSTRUCTIONS (continued)
* Mild detergents include soaps and non-abrasive cleaners

MAINTENANCE INSTRUCTIONS

TROUBLE-SHOOTING GUIDE
If hot unit is NOT working, fi rst check the following causes:
5925 Heisley Road • Mentor, OH 44060-1833
Cleaning Hints:
1.
Use the mildest cleaning procedure that will do the job.
2.
Always rub in the direction of the polish lines to avoid
scratching the surface.
3.
Use only a soft cloth, sponge, fi brous brushes, plastic
or stainless steel pad for cleaning and scouring.
4.
Rinse thoroughly with fresh water after every cleaning
operation.
5.
Always wipe dry to avoid water marks.
CLEANER
Soap, ammonia or mild
detergent* and water.
Mild abrasive made for
Stainless Steel.
Chemical oven cleaner
made for Stainless Steel.
Vinegar
3. Switch is turned off.
4. Thermostat is turned off, or is set too low.
METHOD
1. Sponge on with cloth
2. Rinse
1. Apply with damp sponge or cloth.
2. Rub lightly.
Follow oven cleaner manufacturer's
directions.
1. Swab or wipe with cloth.
2. Rinse and dry.