FIAMA F1X502SSI Manuale di uso e manutenzione - Pagina 3
Sfoglia online o scarica il pdf Manuale di uso e manutenzione per Monitor FIAMA F1X502SSI. FIAMA F1X502SSI 8. Display unit with microprocessor
Stampa la pagina
Display unit with microprocessor
• The stated instructions in this manual do not substitute, but complement the obligations of the legislation in
force regarding safety regulations.
Description
The F1X5_SS instrument is six-digit display unit (reading scale –99999 , +999999) with an input from
transducers that use the SSI interface (encoder, optical lines, position transducers, pressure transducers,
etc.). Through four keys placed on the front panel, it is possible to set up all parameters of the instrument, in
particular the SSI protocol (gray or binary), the bit number (selection from 4 to 24), the scale factor, the
method for the reset/preset of the dimension, etc. The display unit can be provided in versions with two relay
outputs with programmable thresholds and an output RS232/RS485 for communication with remote units
(PLC) in modbus protocol.
The instrument stores the data when the machine is off through non-volatile EEPROM memory.
The display unit is housed in a 48x96 panel case under the DIN 43700 regulations.
M2
Morsettiera
ingressi
Installation
Before installing, connecting or using the instrument read the following instructions:
a) Connect the instrument scrupulously following the manual instructions.
b) Always make the connections using types of cable appropriate for the power and current limits indicated in
the technical data.
c) The instrument is NOT equipped with an On/Off switch, therefore it turns on immediately when connected
to the power supply; for safety reasons the equipment permanently connected to the electricity supply
requires: a two-phase selector switch marked with the appropriate symbol; this will be positioned in the
vicinity of the instrument to be easily accessible to the operator; a single switch can control numerous
instruments.
d) If the instrument is connected to NON-insulated electrical equipment (e.g. thermocouples), the earth
connection must be carried out with a specific lead to prevent this taking place directly through the very
structure of the machine.
e) If the instrument is used in applications with risks of damage to people, machines or materials, it is
absolutely necessary that it is combined with auxiliary alarm systems. It is advisable to ensure the possibility
of verifying the intervention of the alarms also during regular functioning.
f) It is the responsibility of the user to verify, before use, the correct selection of the instruments parameters,
to avoid damages to people or property.
g) The instrument will NOT work in environments with a dangerous atmosphere (inflammable or explosive); it
can be connected to elements which operate in such atmosphere only through appropriate and suitable types
of interface, conforming to the local regulations in force.
Date:13/01/16
Front view
set1
set2
Rear view
1 2 3 4 5 6
1 2 3 4 5 6 7 8
F1X_SSI_ing.doc
RESET
PGM
ENTER
M1
9 10
Morsettiera
alimentazione
F1X5_SSI
Display
Tasti
Pag. 3/3