Cresco 20S Manuale - Pagina 4

Sfoglia online o scarica il pdf Manuale per Spreader Cresco 20S. Cresco 20S 18. Fertilizer and salt spreader

Assembling your Cresco 20
ASSEMBLING THE SLIDE SYSTEM, LOWER FRAME AND STAND:
You will need a phillips head screwdriver, one
pair of plyers/grips and an M6 metric spanner.
2
If you are using the spreader for fertiliser or
seed, slide the summer application into position
as shown above.
4
Locate the lower linkage (22) and place it
through the pivot bracket (21).
#22
1
If you are using the spreader for winter, slide the
winter application into position as shown above.
3
Locate & tighten the 4 screws & washers to fix
the required slider (winter or summer) into po-
sition. Make sure the screws are not overly tight
and the slider can slide backward and forward.
5
Push the free end of the lower linkage (22)
through the centre hole of the chosen slider.
3
Winter Slider