Diginet LEDsmart MMDM/PB Manuale di installazione - Pagina 2

Sfoglia online o scarica il pdf Manuale di installazione per Dimmer Diginet LEDsmart MMDM/PB. Diginet LEDsmart MMDM/PB 16. Push button dimmer with built in on / off switch and multi-way control

Stampa la pagina

Product Item

This guide provides installation, setup and specification information for the LEDsmart

MMDM/PB.

Product summary and capabilities

Designed in Australia to provide optimised dimming of LED based lamps and drivers, this high quality, two-wire phase control

dimmer can be connected in parallel to other LEDsmart

Although optimised for LED lighting loads, the dimmer also provides excellent compatibility with other common lamp types such

as incandescent lamps, 12V halogen (dichroic) lamps and dimmable CFL's.

Programmable setup functions

Setup functions

Minimum Brightness

Maximum Brightness

Kick Start

LED indicators

Separate Switch Mode*

Toggle / Memory

Dimmer

MultiMate™ ON/OFF

* Note: Separate Switch Mode is suitable for single LEDsmart

There are a wide range of LED and CFL lamps available from different manufacturers. The following issues are

occasionally seen when used in conjunction with 2-wire dimmer/timer/switch products.

 When switched off, the LED/CFL lights flicker, pulse on/off or do not switch off completely

 When switched off, the LEDsmart

 When switching on, the LED/CFL lights have difficulty switch on and the dimmer indicators flicker or pulse

It is recommended to install a Diginet 'Load by-pass' device (Diginet item number MMBP) across Load and

Neutral terminals to provide improved performance of these lamps.

Description

If an LED or CFL lamp becomes unstable at low dimming levels, it can flicker or pulse on/off. The

dimmer's minimum brightness can be set to a level above the point at which a lamp flickers/pulses

The maximum brightness level provided by the dimmer can be set to suit customer requirements

This function is only required when dimming some LED and CFL lamp's. To ensure these lamps

switch on, they require the dimmer output to be set to 50% for 0.2 of a second when the lamp is

turned on.

Default: The Kick Start feature is switched off

The dimmer's white LED indicators can be set to glow on or turn off when the dimmer is switched

off

Default: The white LED indicators are set to glow on when the dimmer is turned off

Some lamps, such as non-dimmable CFL's, can flicker when switched OFF using the dimmer's

integrated switch. In these cases, the dimmer can be used in 'Separate Switch Mode' and

combined with a separate mechanical switch

Default: Separate Switch Mode is switched off

The dimmer has the option to turn on at the brightness level set when the lights were turned off

(memory dimmer), or to turn on at the maximum brightness level (toggle dimmer).

Default: the dimmer is setup as a toggle dimmer

MultiMate™ functions can be switched ON or OFF

Default: MultiMate™ features are switched on

devices to provide a simple solution to multi-way control.

installations only. For multi-way installations, see the note below.

LED indicators flicker

Push Button Dimmer/Switch

Push Button Dimmer/Switch, item number