Diginet LEDsmart MMDM/PB Manuale di installazione - Pagina 8

Sfoglia online o scarica il pdf Manuale di installazione per Dimmer Diginet LEDsmart MMDM/PB. Diginet LEDsmart MMDM/PB 16. Push button dimmer with built in on / off switch and multi-way control

Stampa la pagina

Rocker and flat push buttons

Two different styles of push buttons are included in the dimmer packaging, rocker and

flat push button styles. These are interchangeable, depending on customer preferences.

Coloured Bezels

The dimmer's LED indicators are white and the pre-fitted bezel provides a white glow

around the dimmer button. Interchangeable blue, green and orange bezels rings are also

included with the dimmer. These can be used to change the colour of the LED indicators

to match customer colour preferences and/or to more easily identify different

LEDsmart

devices on the same grid plate.

Installing LEDsmart

Adaptor kits are available separately to enable LEDsmart

plates. Order codes are as follows.

DGACCESSPK2

DGACCESSPK3

Dimmer Setup

The LEDsmart

push button dimmer has a number of useful functions which can easily be set up by entering setup mode and

following three easy steps.

It is recommended that the MINIMUM BRIGHTNESS is always setup. The other settings are optional, depending on the dimmer

application. To set the minimum brightness now, go to the next page.

Dimmer Setup Functions

Function

Entering Setup Mode

Setting Minimum Brightness

Setting Maximum Brightness

Setting the Kick Start Feature

Setting Off State LED Feature

Setting Separate Switch Mode

Setting Toggle / Memory Dimmer

Setting MultiMate™ Mode

Factory Defaults Reset

devices into Clipsal Saturn™ or Clipsal Saturn Zen™ wall plates

Adaptor kit for LEDsmart

See Part

See page 9

See page 10

See online guide

devices to be installed into Clipsal Saturn™ or Clipsal Saturn Zen™ wall

Push Button devices

Rotary dimmers

Push Button Dimmer/Switch