digiO2 ETH-102 Manuale di istruzioni - Pagina 3

Sfoglia online o scarica il pdf Manuale di istruzioni per Termometro digiO2 ETH-102. digiO2 ETH-102 14. Bt infrared ear thermometer

Precautions

1. Precision components were used in the construction of this

device. Extremes in temperature, humidity, direct sunlight,

shock or dust should be avoided.

2. Clean the device with a dry, soft cloth or cloth moistened in

alcohol. Never use thinner, benzine or cleaner with abrasives.

3. This device is not water resistant. Protect it from liquid spills.

4. Measurements may be impaired if the device is used close to a

television, microwave oven, cellular telephone, X-ray or other

devices with strong electrical ﬁelds.

5. Keep this device out of the reach of children. A child may

swallow the probe cover or the battery while playing with it. If

a child should swallow them, seek medical treatment immedi

ately.

6. Do not self-diagnose your condition using the measured result.

Consult your doctor if your temperature is higher than the

normal temperature or you feel unwell.

7. Used equipment, parts and batteries are not treated as

ordinary household waste and must be disposed of according

to the applicable regulations.

Before Using the Thermometer

Keep this device out of the reach of children. A child may

swallow the probe cover while playing with it. If a child should

swallow it, seek medical treatment immediately.

■ Use the thermometer at a room temperature between 10

and 40˚C.

If the thermometer is stored in an environment with the

temperature out of the above range or the temperature of

the storage area diﬀers greatly from that of the measuring

area, allow the thermometer to equalize to the room

temperature before use.

■ DO NOT measure temperature if:

Your ear is cold, wet or blocked with ear wax.

It is within 30 minutes after eating, taking a bath or physical

exercise.

You are suﬀering from an ear infection.

■ Always use the thermometer with its probe tip clean. Do

not touch the probe cover after cleaning.

A dirty probe tip may cause an inaccurate measurement.

Clean the probe tip with a dry, soft cloth or cloth moistened

with alcohol before use. When cleaned, wait for a few

minutes before measuring temperature.

Caution