Accusplit Eagle AE190XLG Manuale di istruzioni per l'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Pedometro Accusplit Eagle AE190XLG. Accusplit Eagle AE190XLG 6. Accusplit pedometer operating instructions

Stampa la pagina

OTHER SETTINGS

The Step Filter and Unit of Measurement settings are

accessed through a special "deep set" mode.

To enter this mode, press and hold the S1 (MEMORY) button

for 4 seconds. T he screen will display a single digit. From

within Deep Set mode, press the S2 (MEMORY) button to

cycle back and forth between the Step Filter set point and

Choice of Unit System.

CHANGING STEP FILTER SETTING

While the JW200 PedometerEngine™ Step Sensor is

extremely accurate, some people like to have the ability to

filter out false steps. T herefore, the unit has a variable setting

step filter, to allow fine-tuning to your specific preferences.

You can set the value to any value from 0 – 5 steps. For

example, if the filter is set to "3" , the unit will wait to start

counting steps until more than three steps have been taken in

less than five seconds.

Press S3+ (MODE) or S3– (RESET) to change the Step Filter

Setting.

REPLACING THE BATTERY AND MASTER RESET

When the display starts to dim or goes blank, it is time to

replace the battery.

If the display is not uniformly dim or blank, and appears to

display "erroneous data" , do a Master Reset by pressing all

3 buttons simultaneously for 3 seconds and then release.

The display should go blank, then turn all segments on, then

display 0 steps in Step Mode.

Note: All the settings will return to their default setting values.

If you need to change the battery, the settings will also revert

to default settings.

SPECIFICATIONS, FEATURES, and FUNCTIONS

Description of Functions

• Counts Steps up to 99,999 then rollover.

• Has a T otal Memory for Steps that counts up to 99,999,999

steps, then rollover.

• Keeps track of progress towards Step Goal (default setting

is 3500 steps, but can be set from 0-99,990 steps, in 100

step increments).

• Counts T ime spent in step activity, up to 999 Min 59 sec,

then rollover. Automatically counts whenever step activity

is occurring.

• Has a T otal Memory for Activity T ime that counts up to

99,999 minutes, then rollover.

Can be set

from 0-5

steps

"US" (English)

or "EU" (Metric)

IGI

ALKER

.COM

STEP TIME

DIST CAL

MEMORY

100%

190

JW200

S3-

S1,S2,S4

S3+

Set measurement mode

CHANGING UNITS (English vs. Metric)

The Pedometer can display either in English units (in, mi, and lb - this

is the default), or in Metric units (cm, km, and kg). From within Deep

Set mode (see pg. 32), press the S2 (MEMORY) button to cycle back

and forth between setting the Step Filter set point and Choice of Unit

System. T he unit will show either "US" or "EU" (for European Union)

depending on the unit system chosen. If you change units after using

the pedometer, the unit will convert all of your data into the new unit

system when you exit Deep Set model. Y ou can check to see which

system of units you are using by seeing which measurement units are

displayed on the Stride and Weight setting screens.

Press S3+ (MODE) or S3– (RESET) to change the Measurement Mode.

Press and hold S4 (MEMORY) for 2 seconds to exit Deep Set Mode.

Note: T he unit will save any changes and exit set mode after

30 seconds unattended.

To replace the battery:

1. Insert a coin into the slot on the

bottom of the case, and twist to

loosen the faceplate. Remove

faceplate and set aside.

2. Locate the battery holder as seen

on sketch. Pull out the old battery,

and push a new LR-44 battery into the holder,

with positive terminal (+) facing up.

3. Snap faceplate back into place, hooking the bottom

two tabs first, then closing by pressing together at the

top two tabs.

• Keeps track of progress towards Activity T ime Goal

(default setting is 30 minutes, but can be set from 0-999

min, in 1 min increments).

• Counts distance traveled during step activity, up to

999.99 mi or km, then rollover. Automatically counts

whenever step activity is occurring.

• Has a T otal Memory for Distance that counts up to

99,999 mi or km, then rollover.

• Keeps track of progress towards Distance Goal (default

setting is 1.0 mi/1.6 km, but can be set from 0-9999.99 mi/km,

in 0.1 mi or km increments).

• Adjustable stride length for greater distance accuracy

(default setting is 21 in/53 cm, but can be set from 12-72 in

(30-180 cm), in 0.25 in / 1 cm increments.

IGI