Cisco 2950 - Catalyst Switch Scheda tecnica - Pagina 16

Sfoglia online o scarica il pdf Scheda tecnica per Interruttore Cisco 2950 - Catalyst Switch. Cisco 2950 - Catalyst Switch 20. Long-reach ethernet switches
Anche per Cisco 2950 - Catalyst Switch: Manuale di soluzione (17 pagine), Bollettino dei prodotti (3 pagine), Bollettino di assistenza prodotti (5 pagine), Manuale di migrazione (25 pagine), Bollettino di assistenza prodotti (6 pagine), Manuale introduttivo (29 pagine), Manuale (19 pagine)

Cisco 2950 - Catalyst Switch Scheda tecnica
Feature
Description
Standards
• IEEE 802.1x
• IEEE 802.1w
• IEEE 802.1s
• IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
• IEEE 802.1D Spanning-Tree Protocol
• IEEE 802.1p class-of-service (CoS) prioritization
• IEEE 802.1Q VLAN
• IEEE 802.3 10BASE-T specification
• IEEE 802.3u 100BASE-TX specification
• IEEE 802.3ab 1000BASE-T specification
• IEEE 802.3z 1000BASE-X specification
• 1000BASE-SX (SFP)
• 1000BASE-LX (SFP)
• RMON I and II standards
• SNMPv1, SNMPv2c, SNMPv3
Y2K
• Y2K compliant
Connectors and
• LRE ports: RJ-21 connector; one-pair Category 1, 2, or 3 unshielded twisted-pair (UTP)
Cabling
cabling
• 10BASE-T ports: RJ-45 connectors; two-pair Category 3, 4, or 5 unshielded twisted-pair
(UTP) cabling
• 100BASE-TX ports: RJ-45 connectors; two-pair Category 5 UTP cabling
• 1000BASE-T ports: RJ-45 connectors; two-pair Category 5 UTP cabling
• 1000BASE-SX and -LX SFP-based ports: SC fiber connectors, single-mode or multimode
fiber
• Management console port: 8-pin RJ-45 connector, RJ-45-to-RJ-45 rollover cable with
RJ-45-to-DB9 adapter for PC connections; for terminal connections, use RJ-45-to-DB25
female data-terminal-equipment (DTE) adapter (can be ordered separately from Cisco, part
number ACS-DSBUASYN=)
Power Connectors
Customers can provide power to a switch by using either the internal power supply or the
Cisco Redundant Power System (RPS) 300. The internal power supply connector is located in
the front of the switch and the RPS connector is located at the back of the switch.
Internal Power Supply Connector
• The internal power supply is an auto-ranging unit.
• The internal power supply supports input voltages between 100 and 240 VAC.
• Use the supplied AC power cord to connect the AC power connector to an AC power outlet.
Cisco RPS Connector
• The connector offers connection for an optional Cisco RPS 300 that uses AC input and
supplies DC output to the switch.
• The connector offers a 300-watt redundant power system that can support six external
network devices and provides power to one failed device at a time.
• The connector automatically senses when the internal power supply of a connected device
fails and provides power to the failed device, preventing loss of network traffic.
• Attach only the Cisco RPS 300 (model PWR300-AC-RPS-N1) to the
redundant-power-supply receptacle.
Indicators
• Per-port status LEDs: link integrity, disabled, activity, and speed (uplinks only) indications.
• System status LEDs: system and RPS indications.
All contents are Copyright © 2002 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Cisco Systems, Inc.
Page 16 of 19