Accusplit Healthengine AH190M28 Istruzioni per l'uso
Sfoglia online o scarica il pdf Istruzioni per l'uso per Pedometro Accusplit Healthengine AH190M28. Accusplit Healthengine AH190M28 4. Accusplit pedometer operating instructions ah190m28
Anche per Accusplit Healthengine AH190M28: Manuale di istruzioni per l'uso (8 pagine)
Stampa la pagina
ACCUSPLIT, Inc.
3090 Independence Drive, Suite 148
Livermore, CA 94551 USA
800-935-1996 • 925-290-1900 • FAX 925-290-1930
www.ACCUSPLIT.com • [email protected]
Eat Right! Walk More! Live Well!
e ACCUSPLIT Lifestyle
How to Open your pedometer.
See diagrams at right.
2
The pedometer has two display modes: CURRENT DAY and
MEMORY.
1. CURRENT DAY display: Display area in lower right of
screen shows SPEEDOMETER function: Mile/h and
clock is present in lower left corner.
2. MEMORY display: Memory display area in lower right
of screen shows which day's results you are viewing.
To enter MEMORY display, first press the yellow MODE
button, then press the gray "M" button.
Return to CURRENT DAY display by repeatedly pressing
the gray "M" button until the memory display area goes
back to speed indication and the clock returns.
Make sure you are in CURRENT DAY display when setting up
your pedometer and checking today's results.
4
Setting the Clock
STEP count
8722
5 : 18
Clock
Speed
The clock must be set in order for the memory's automatic
rollover function to work correctly.
6
990-004B
2.04
Mile/h
ACCUSPLIT
AH190M28
Operating Instructions
DISPLAYS
CURRENT DAY
Display
7329
1
days
(no clock
MEMORY
in memory
display area
(flashes when in memory mode)
mode)
SETTING UP YOUR PEDOMETER
ACCUSPLIT products use a common setting procedure, S1-
S2-S3-S4.
Press S1 for 2 seconds: Enter the SET mode
Press S2: Change the field to be set
Press S3: Change the field value
Press S4 for 2 seconds: Exit the SET mode
1. Repeatedly press the yellow MODE button until the
pedometer displays the current step count. (The
display will show a line underneath the word "STEP"
on the label.)
2. S1: Press and hold the yellow S1 (MODE) button for 2
seconds. The HOUR display will start to blink, showing
that you've entered SET mode.
3. S3: Press the S3 ▲ (MEMORY) button to increase the
HOUR display. Press the S3 ▼ (RESET) button to de-
crease the HOUR display. Hold the button down to
change hours quickly. PM hours are displayed in
military time (1:00 PM is 13:00, 2:00 PM is 14:00, etc.).
PEDOMETER
3.57
9 : 58
3.21
Mile/h
MEMORY
button
MEMORY
Display
3
5
7