Digiop Desktop Hardware Manuale di avvio rapido - Pagina 2

Sfoglia online o scarica il pdf Manuale di avvio rapido per Desktop Digiop Desktop Hardware. Digiop Desktop Hardware 2.

3. Setting Up Your System

1. Connect a monitor(s) to

the VGA and/or DVI-D ports.

Back Panel

4. Add IP Cameras

Connect all of your IP cameras to a POE switch. Ensure that the POE switch has adequate power on each port to han-

dle each camera. Connect an Ethernet cable between the POE switch and the Ethernet port on the Expansion Card

labeled Camera POE Switch. DIGIOP

switch. This will keep the IP camera traffic isolated on its own switch.

5. Add a DIGIOP

Connect all of your analog cameras to your DIGIOP

tween the DIGIOP

and the Ethernet port on the Expansion Card labeled Encoder Only. If you have more than one En-

coder, connect the second Encoder to the second Ethernet port on the Expansion Card labeled Encoder Only with the

provided orange Ethernet patch cable. If you have 2 Encoder Only Ethernet ports, it does not matter in which order you

connect the Encoders.

2. Connect the network

cable to the Ethernet port on

the Back Panel.

Ethernet Ports

recommends that you do not connect a cable from your network to the POE

Encoder (optional add-on)

Encoder. Connect the provide orange Ethernet patch cable be-

3. Connect the keyboard and

mouse to the USB 2.0 ports.

Expansion Cards

4. Connect the power cable.

Press the power buttons on

the monitor and computer.