BYECOLD IGT1-HH0606-1 Manuale di istruzioni - Pagina 4
Sfoglia online o scarica il pdf Manuale di istruzioni per Riscaldatore BYECOLD IGT1-HH0606-1. BYECOLD IGT1-HH0606-1 9. Infrared ceiling heater
Stampa la paginaWarning
Do not use the device in small rooms if persons are present who cannot leave the
room independently and who are not under constant supervision.
Warning
Some parts of this product can become very hot and cause burns. Particular
attention has to be given where children and vulnerable people are present.
•
To avoid the possibility of burns, the following people should be much more
careful when using the heaters: infants and kids, people with sensitive skin,
the old, the sick, people who is drunk, people who takes sleeping pills.
•
It's dangerous of installation close to curtains and other combustible materials.
• Remove the protective film(if any) before using.
• Be sure the operation voltage is between 220-240V, 50/60Hz, and power
supply has been strictly in accordance with local electrical codes
required to follow the local wiring regulations), and the product must be well
grounded.
•
The devices will draw more current than small appliances, so a separate 5A
socket is required.
•
Do not use the device in potentially explosive rooms.
•
Do not use the device in aggressive atmosphere.
•
Set the device up in a stable position.
•
Do not clean the heating part or let the water flow into the electric parts.
•
Do not use the device with wet or damp hands.
•
Do not expose the device to directly squirting water.
Never insert any objects or limbs into the device.
•
•
Do not cover or transport the device during operation.
•
Do not sit on the device.
•
This appliance is not a toy! Keep away from children and animals.
•
Do not leave the device unattended during operation.
•
Check accessories and connection parts for possible damage prior to every use
of the device. Do not use any defective devices or device parts.
•
Ensure that all electric cables outside of the device are protected from damage
(e.g. caused by animals). Never use the device if electric cables or the power
connection are damaged!
•
The electrical connection must correspond to locally relevant Electricity and
Wiring Regulations.
•
Insert the mains plug into a properly secured mains socket.
•
Do not use the device when the socket or wire overloaded.
•
Observe the device's power input, cable length and intended use when
selecting extensions to the power cable. Completely unroll extension cables.
Avoid electrical overload.
•
Before carrying out maintenance, care or repair work on the device, remove
the mains plug from the mains socket. Hold onto the mains plug while doing
so.
•
Switch the device off and disconnect the power cable from the main socket
when the device is not in use.
(Wiring is
•
Do not use the device under any circumstances if any damages on the mains
plug or power cable. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid
a hazard. Defective power cables pose a serious health risk.
•
During the installation of the device observe the minimum distances from
walls
and other objects as well as the storage and operating conditions
specified in the related chapter.
•
Never drill into the heating device.
•
Do not use the device in immediate proximity to curtains.
•
Do not place the device on combustible ground.
•
Do not touch the surface during the device working to avoid burns.
•
Allow the device to cool down before transport and / or maintenance work.
•
Do not use this device near bathtubs, shower trays, swimming pools or other
water containers. Risk of electric shock!
•
The device must be placed where the switches and controllers cannot be
touched by a person in a bathtub or shower.
• Do not use this device in a child-care centre and bathroom.(Only for Sweden)