Accusplit AX602M500 Manuale di istruzioni per l'uso - Pagina 14

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Guarda Accusplit AX602M500. Accusplit AX602M500 15. Digital quartz stopwatches

52-53

Before starting again, you can reset the timer by

pressing [STOP • RESET].

Note: When you reset the Speed timer, the speed

measurement starts again from a reset state, and

all speed records in memory will be cleared (pro-

vided that the storage is not under segmented run

memory mode).

The Recall function is similar to chronograph

recall. If segmented run memory is selected, the

DATA mode can be accessed and records storing

54-55

Further presses of [RECALL] will retrieve the

memories in ascending order or reverse order

depending on whether the speed measurement is

stopped or under operation respectively. During

Recall, the "Recall" indicator is ON.

(Note: Speed mode and Chrono mode will

not run simultaneously. When Chrono mode

is active, Speed mode should be in reset

state and vice versa.)

Speed Mode

after reset.

both the speed and elapsed time can be retrieved.

Lap Time & Speed Recall

Similar to the Chrono Recall mode, during speed

measurement or Stop state, you can press

[RECALL] to recall the speed/lap memories.

The Mode message will be shown for one to

two seconds as the Mode message display is

displayed.

RECALL

The Speed and Lap time will be displayed on the

upper and the middle lines. The lower line shows

the current time counting. During Data recall, the

fastest speed will be reviewed ﬁ rst, then the slow-

est speed and average speed.

Please register your new stopwatch at www.ACCUSPLIT.com/support or

send this form to address on the back cover of this instruction booklet

Email (preferred)

User

NO-PROOF-OF-PURCHASE LIMITED WARRANTY

See label on back of unit for details, or check

http://support.ACCUSPLIT.com