Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Scheda tecnica - Pagina 7

Sfoglia online o scarica il pdf Scheda tecnica per Interruttore Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 9. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Anche per Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion: Nota di installazione (14 pagine), Manuale di soluzione (17 pagine), Nota di installazione (46 pagine), White Paper (19 pagine), Descrizione (1 pagine), Bollettino dei prodotti (6 pagine), Avviso (4 pagine), Scheda tecnica (18 pagine), White Paper (18 pagine), Manuale di configurazione (8 pagine), Nota di installazione (28 pagine), Manuale di risoluzione dei problemi (11 pagine), Nota di installazione (18 pagine), Manuale d'uso (17 pagine), Nota di installazione (24 pagine), Manuale (19 pagine), Nota di installazione (36 pagine)

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Scheda tecnica
IEC 60950
AS/NZS 60950/TS001
EMC Compliance
FCC Part 15 (CFR 47) Class A
VCCI Class A
EN55022 Class A
CISPR 22 Class A
CE marking
AS/NZS 3548 Class A
ETS300 386
EN55024
EN61000-6-1
EN50082-1
Network Management
ETHERLIKE-MIB (RFC 1643)
IF-MIB (RFC 1573)
Bridge MIB (RFC 1493)
CISCO-STACK-MIB
CISCO-VTP-MIB
CISCO-CDP-MIB
RMON MIB (RFC 1757)
CISCO-PAGP-MIB
CISCO-STP-Extensions-MIB
CISCO-VLAN-Bridge-MIB
CISCO-VLAN-Membership-MIB
CISCO-UDLDP-MIB
CISCO-ENTITY-FRU-CONTROL-MIB
CISCO-COPS-CLIENT-MIB
ENTITY-MIB (RFC 2037)
HC-RMON
RFC1213-MIB (MIB-II)
SMON-MIB
Maximum Cabling Distance
100BASE-FX multimode Fast Ethernet: 62.5- and 125-micron multimode fiber: 400m half duplex, 2-km full duplex
100BASE-FX single-mode Fast Ethernet: standard ITU-T G.652 (IEC 60793-2 B1.1/B1.3) single-mode fiber: 10-km half or full duplex
100BASE-LX Fast Ethernet: standard ITU-T G.652 (IEC 60793-2 B1.1/B1.3) single-mode fiber: 10-km half or full duplex
100BASE-BX10 Fast Ethernet: standard ITU-T G.652 (IEC 60793-2 B1.1/B1.3) single-mode fiber: 10 km over single strand of fiber
10BASE-FL Ethernet: 62.5- and 125-micron multimode fiber: 2-km half or full duplex
Indicators and Interfaces
Status: Green (operational); red (faulty); orange (module booting or running diagnostics)
Link good: Green (port active); orange (disabled); off (not active or not connected); blinking orange (failed diagnostic and disabled)
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com
© 2005 Cisco Systems, Inc. All right reserved.
Page 7 of 9