Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Scheda tecnica - Pagina 7

Sfoglia online o scarica il pdf Scheda tecnica per Interruttore Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 18. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Anche per Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion: Nota di installazione (14 pagine), Manuale di soluzione (17 pagine), Nota di installazione (46 pagine), White Paper (19 pagine), Descrizione (1 pagine), Bollettino dei prodotti (6 pagine), Avviso (4 pagine), Scheda tecnica (9 pagine), White Paper (18 pagine), Manuale di configurazione (8 pagine), Nota di installazione (28 pagine), Manuale di risoluzione dei problemi (11 pagine), Nota di installazione (18 pagine), Manuale d'uso (17 pagine), Nota di installazione (24 pagine), Manuale (19 pagine), Nota di installazione (36 pagine)

Stampa la pagina
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Scheda tecnica
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Note:
PoE is not supported on Cisco Express Forwarding 720 10/100/1000 interface modules.
Table 3.
Cisco Express Forwarding 720 Copper 10/100/1000 Ethernet Interface Module
Product Number
Primary
Application
WS-X6748-GE-TX
Data center
and server
farm
Figure 1.
Cisco Express Forwarding 720 10/100/1000 Interface Module (part number WS-X6748-GE-TX)
with Distributed Cisco Express Forwarding Daughter Card (part number WS-F6700-DFC3A)
Cisco Catalyst 6500 Series Cisco Express Forwarding 256 10/100 and 10/100/1000
Interface Modules
Designed for premier wiring closets, small campus backbone, and server farm applications,
Cisco Express Forwarding 256 10/100 and 10/100/1000 Ethernet-over-copper interface modules
provide line-rate 10/100 Ethernet forwarding and gigabit bandwidth options. (Refer to Table 4).
The PoE Cisco Express Forwarding 256 10/100/1000 interface modules provide flexible 10-, 100-,
and 1000-Mbps access to the desktop through standard RJ-45 connectors. These interface
modules feature PoE field-installable daughter cards for pay-as-you-grow investment protection
and flexibility. Purposefully designed for the wiring closet with 8:1 oversubscription, these
10/100/1000 interface modules cannot be equipped with distributed forwarding cards.
Offered with a choice of RJ-45 and RJ-21 connectors, the data-only Cisco Express Forwarding 256
10/100 and 16-port 10/100/1000 Ethernet interface modules can be deployed where PoE
capability is not required, and they can be equipped with distributed forwarding daughter cards for
higher-performance local packet-forwarding environments.
The Cisco Catalyst 6500 Series Cisco Express Forwarding 256 10/100 and 10/100/1000 interface
modules offer the following operational advantages and characteristics:
Forwarding architecture: These modules use the central Cisco Express Forwarding
●
engine located on the supervisor engine.
Forwarding performance: These modules forward packets up to 30 Mpps per system
●
and up to 15 Mpps per slot if upgraded to support distributed forwarding.
Fabric connection: These modules connect to the switch fabric through one 8-Gbps
●
connection and the 32-Gbps shared bus.
2
Queues Legend: 1p3q1t = 1 priority queue, 3 round robin queues, 1 threshold
Ports,
PoE
Maximum
Connector,
Support
Frame
Maximum
Size
Distance,
(jumbo
and Cable
frame)
Type
Support
48, RJ-45,
No
Up to 9216
100m,
bytes per
Category 5
frame
cable
Solution Overview
Queues per
Buffer
Port
Size
(Tx=Transmit,
per
2
Rx=Receive)
Port
Tx-1p3q8t;
1.3 MB
Rx-1q8t
(when using
Distributed
Cisco Express
Forwarding)
Page 7 of 18