ABB A101-H Series Istruzioni di montaggio originali - Pagina 12

Sfoglia online o scarica il pdf Istruzioni di montaggio originali per Caricabatterie ABB A101-H Series. ABB A101-H Series 20. Radial turbocharger

Assembly Instructions / A101-H

4 Installing the turbocharger / 4.1 Inserting gaskets into the bracket

Installing the turbocharger

4.1

CAUTION

Inserting the gaskets

Gaskets that are forgotten, damaged or improperly inserted will lead to oil

leaks.

Always use new gaskets and insert them carefully into the slot.

The oil is supplied (02) and drained (03) through the bracket (01).

The necessary sealing is provided by O-rings. The O-rings are not included in the ABB Turbo

Systems scope of delivery.

Fig. 5: Inserting gaskets into the bracket

Bracket

Oil supply

Oil drain

Pin (06) as installation safety device

Turbochargers can have an oil inlet either on their right or left side; the oil inlet position can

be different for the turbocharger fitted on the left and on the right engine bank.

A pin can be installed in every support as an installation safety device to prevent inadvertent

incorrect fitting. This pin fits into the respective slot on the foot of the bearing casing. In-

structions of the enginebuilder must be observed.

Slot for O-ring

O-rings

Pin (optional)

HZTL455311P0038_EN

Rev.A

December 2019