Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Manuale d'uso - Pagina 11

Sfoglia online o scarica il pdf Manuale d'uso per Interruttore Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 17. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Anche per Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion: Nota di installazione (14 pagine), Manuale di soluzione (17 pagine), Nota di installazione (46 pagine), White Paper (19 pagine), Descrizione (1 pagine), Bollettino dei prodotti (6 pagine), Avviso (4 pagine), Scheda tecnica (9 pagine), Scheda tecnica (18 pagine), White Paper (18 pagine), Manuale di configurazione (8 pagine), Nota di installazione (28 pagine), Manuale di risoluzione dei problemi (11 pagine), Nota di installazione (18 pagine), Nota di installazione (24 pagine), Manuale (19 pagine), Nota di installazione (36 pagine)

*Apr 6 17:36:36.145: %VSLP−SW1_SP−5−RPR_MSG: Role change from ACTIVE to HOT_S

hence need to reload

*Apr 6 17:36:36.145: %VSLP−SW1_SP−5−RPR_MSG: Reloading the system...

*Apr 6 17:36:36.145: %SYS−SW1_SP−5−RELOAD: Reload requested Reload Reason: VS

change from ACTIVE to HOT_STANDBY.

♦

If the configuration is changed, marked dirty by the configuration sync process, the switch

does not reload automatically.

♦

Manual reload must be issued on old ACTIVE after configuration is corrected and saved.

Even if you just enter configuration mode and exit, it marks the configuration dirty and forces

a manual intervention.

*Aug 13 04:24:34.716: %dualACTIVE−1−VSL_RECOVERED: VSL has recovered

during dual ACTIVE situation: Reloading switch 2

*Aug 13 04:24:34.716: %VS_GENERIC−5−VS_CONFIG_DIRTY: Configuration has change

Ignored reload request until configuration is

Refer to Dual−Active Detection for more information.

Redundancy with Service Modules

Service module support is a key requirement in order to position the VSS in the enterprise campus and

enterprise data center market. The list of service modules that are supported in the Virtual Switch System are:

Service Module

Network Analysis Module

(NAM−1 and NAM−2)

saved

Minimum

Cisco IOS

Module

Release

12.2(33)SXH1

3.6(1a)