Digiprog III Manuale introduttivo - Pagina 10

Sfoglia online o scarica il pdf Manuale introduttivo per Automobile Accessories Digiprog III. Digiprog III 10. Mileage correction tool

Digiprog Ltd.

www.digiprog.com

Finally some important points to remember.

Always connect the Eeprom to the ST01 or ST04 before you

connect to the DigiProg this will avoid Electro static feedback

(ESD).

Never solder the connections whilst the lead is connected to the

programmer, this will damage the DigiProg.

Please do not sit at home or in your car & play with the DigiProg to

see which cars it can do. If you press the DigiProg function keys the

DigiProg will start looking for the Cars protocol, you wouldn't ask

your PC to print if there was no printer.

Always keep your DigiProg in its case when not in Use & keep it in a

dry environment at night (don't leave it in the trunk of your car)

If you are using solvents to remove lacquers' from Eeprom's ensure

that they are cleaned completely as the solvent can damage the

clips.

We hope you will have many years of use from your DigiProg, don't

forget if you are not sure ask the helpdesk.

INTRODUCTION

Page 10