Accustic Arts POWER I you Manuale - Pagina 4

Sfoglia online o scarica il pdf Manuale per Amplificatore Accustic Arts POWER I you. Accustic Arts POWER I you 13.

Stampa la pagina
4 Positioning
For reasons of better access to the various input and output sockets we recommend you position the unit
in an audio rack.
Please observe at all times:
▪ Ensure that the unit has sufficient air around it and avoid extreme temperature influences on the
unit, especially direct sunshine and high humidity.
▪ Before you connect the unit with some other unit using a cable, please never forget that both
units must first be switched off and disconnected from the mains power.
▪ DANGER OF FIRE! Please never cover the ventilation slots (AA logo on the top plate). This could
lead to overheating of the power amplifier and cause serious damage. Therefore leave a minimum
of 5 cm distance at the sides and 10 cm distance above the housing cover.
5 Installation and start-up
Fig. 1: Rear view
8
DC-REMOTE OUTPUT
230V AC 50Hz - 500W max
Handmade In GERMANY
1
2
POWER: Mains power switch
1
FUSE: Fuse holder for the main fuse (plastic cap with integrated fuse)
2
SPEAKER LEFT: Left pair of loudspeaker output sockets
3.1
SPEAKER RIGHT: Right pair of loudspeaker output sockets
3.2
INPUT 1 & 2: Balanced inputs (XLR) for connection of reproduction devices 1 and 2
4
INPUT 3 & 4: Unbalanced input (RCA) for connection of reproduction devices 3 and 4
5
INPUT 5: Unbalanced input (RCA/Chinch) for connection of reproduction device 5; can be also
6
SURROUND BYPASS ; see chapter
PRE-OUTPUT: Unbalanced input (RCA); the POWER I can be used as a pre
7
8
DC-REMOTE OUTPUT: DC control output for remote activation of separate power amp or a subwoofer
7
6
ACCUSTIC ARTS INTEGRATED AMPLIFIER POWER 1
PRE OUTPUT
UNBALANCED INPUTS
PRE/REC OUT
INPUT-5
INPUT-4
R
L
R
L
R
L
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
7. 5
5
4
BALANCED INPUTS
INPUT-3
BAL2-R
BAL2-L
R
L
+
-
-
SPEAKER
R
L
3.1
3.2
before use
BAL1-R
BAL1-L
+
5