Cisco Catalyst 2360 Manuale introduttivo - Pagina 7

Sfoglia online o scarica il pdf Manuale introduttivo per Interruttore Cisco Catalyst 2360. Cisco Catalyst 2360 21.

Stampa la pagina

Step 10

If you changed the static IP address on your PC in

static IP address.

Step 11

You can now manage the switch by using the Cisco Network Assistant, the device manager, or both.

See the

the switch.

We strongly recommend that you download the Cisco Network Assistant from Cisco.com and use it to

manage the switch. You can download it from this Cisco.com site:

http://www.cisco.com/en/US/products/ps5931/index.html

You can display the device manager by following these steps:

Troubleshooting:

If the device manager does not appear:

•

Setting the Switch Air Flow Direction

The fan module is reversible, so the switch can be ventilated by airflow into the switch ports or airflow

out of the switch ports. The best practice is to configure the switch air flow direction to match that of the

other devices in the same rack.

See a video demonstration of the fan installation here:

Note

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps10920/vds_cis_108148_cat2360_fan_i

nstallation.html

By default, the fan is installed so that air flows into the ports. To reverse the air flow, remove the fan

module, rotate it 180 degrees

OL-22149-02

"Managing the Switch" section on page 10

Start a web browser on your PC or laptop.

Enter the switch IP address, username, and password (assigned in

press Enter. The device manager page appears.

Confirm that the port LED for the switch port connected to your network is green.

Confirm that the PC or laptop you are using to access the switch has network connectivity by

connecting to a well-known web server in your network. If there is no network connection,

troubleshoot the network settings on the PC or laptop.

Make sure that the switch IP address in the browser is correct.

If switch IP address in the browser is correct, the switch interface LED is green, and the PC or

laptop has network connectivity, continue troubleshooting by reconnecting the PC or laptop to the

switch. Configure a static IP address on the PC or laptop that is in the same subnet as the switch

IP address. For example:

–

If your switch IP address is 172.20.20.85 and your PC or laptop IP address is 172.20.20.84,

both devices are in the same network.

–

If your switch IP address is 172.20.20.85 and your PC or laptop IP address is 10.0.0.2, the

devices are in different networks and cannot communicate directly.

When the LED on the switch port connected to the PC or laptop is green, re-enter the IP address

of the switch in a web browser to display the device manager. Once the device manager appears,

you can continue with the switch configuration.

(Figure

Step

2, change it back to the previously configured

for information about configuring and managing

2), and re-install it.

Catalyst 2360 Switch Getting Started Guide

Setting the Switch Air Flow Direction

Step

7) in the web browser, and