Sharp Carousel R-228BS Manuale operativo - Pagina 11

Sfoglia online o scarica il pdf Manuale operativo per Forno a microonde Sharp Carousel R-228BS. Sharp Carousel R-228BS 29.

C O N T R O L S

Your oven has a 12 hour clock feature.

1. Press the CLOCK/TIMER button twice. The hour fi gure will fl ash and the clock indicator will illuminate.

2. R otate the ENTRY dial until the correct hour is displayed, the input time should be within 2.

3. Press the CLOCK/TIMER button, the minute fi gure will fl ash.

4. Set the minutes. Rotate the ENTRY dial until the correct minutes are displayed, the input time should be within 0-59.

5. Press the CLOCK/TIMER button to start the clock. The icon ":" of the digital time will be fl ashing on the display and

the clock indicator will disappear.

NOTES:

• If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not been set,

the display will show "0:00".

• To check the time of day during a cooking process, press CLOCK/TIMER button and the LED will display the time of day

for 2-3 seconds. This does not aff ect the cooking process.

• If in the process of setting the clock, the STOP/CLEAR button is pressed, the oven will revert back to the former setting.

• If the electrical power supply to your microwave oven is interrupted, the display will intermittently show "0:00" after the power

is reinstated. If this occurs during cooking, the programme will be erased. As will the time of day.

You can use the kitchen timer, in instances where microwave cooking is not involved for example to time boiled eggs

cooked on conventional cooktop or to monitor the standing time for cooked/defrosted food.

Example:

To set the timer for 5 minutes.

1. Press CLOCK/TIMER

once.

When the timer arrives at 0:00, an audible signal will sound 5 times and the LED will then display the time of day.

You can enter any time up to 95 minutes. To cancel the KITCHEN TIMER while counting down, simply press the STOP/CLEAR

button.

NOTE: The KITCHEN TIMER function cannot be used whilst cooking.

2. Rotate ENTRY dial to select

time .

3. Press the START/+30sec

key to start the timer.

4. Check the display.

(The display will count down

through the programmed

time.)