Sharp Aquos LC 20S4U Manuale operativo - Pagina 15

Sfoglia online o scarica il pdf Manuale operativo per TV LCD Sharp Aquos LC 20S4U. Sharp Aquos LC 20S4U 45. Sharp operation manual liquid crystal television lc-20s4u
Anche per Sharp Aquos LC 20S4U: Manuale operativo (43 pagine)

Stampa la pagina

EZ SETUP (With AUTO CLOCK Setting)

1 1 : 5 3 AM

AUTO

PROGRAMMING

PLEASE

WAIT

PLEASE

WAIT

NOW

SEARCH I NG

T I ME

~STEREO

SAP

MONO

Press ENTER to access START EZ SETUP mode.

Press

.Ji../T

to select "YES", and press ENTER.

• If you want to stop the EZ SETUP process once it has

started, press MENU and it will be canceled. If you want to

set up again, please refer to page 24 on CH-SETTING.

The tuner will automatically search for the broadcasting

and cable TV channels. (The channel number will

automatically increase when it appears.)

Once EZ SETUP is completed, the lowest channel

number memorized will be displayed.

The LCD TV set will automatically switch to searching

for EDS signals.

EDS signals are received, the channel number and time will

be displayed, and then the screen shown in step 5 appears.

Do not let the EZ SETUP screen remain unattended for a long time.

If EZ SETUP does not memorize all the channels in your region,

please refer to page 24 for more information on manually memo-

rizing the channels using CH-SETTING.

It may be difficult to preset when the broadcasting signals are

weak, the channel cycle frequency is incorrect or the frequency

jamming is occurring around the area. Please refer to page 24 for

more information on manually memorizing channels using

CH-SETTING.

If there are no channels with EDS signals or the antenna signal is

weak, the AUTO CLOCK setting may not operate. In this case, a

"EDS CH IS NOT AVAILABLE." message will appear and the

mode will change to MANUAL CLOCK setting. Refer to page 16 to

set the clock manually.

POWER

PICFLlP DISPLAY AV MODE

0 0 0

RETIl'N

8MENU

~.."

•

AUDIO

MUTE

ONLY

INPUT

0 0 0 0

Press ENTER to access AUTO CLOCK mode.

Press

.Ji../T

to select "ON" or "OFF".

When you select "ON", the LCD TV set will

automatically adjust the clock to search time-signals

(EDS signals), which are provided by some TV stations.

The AUTO CLOCK setting may take from several

minutes to an hour depending on the number of

channels to receive and signal status. If you know the

channel of the EDS signal carrier (PBS or other) in your

area, select "OFF" and follow the procedure in AUTO

CLOCK Setting. (See page 15.)

Press POWER, located on the upper side of the main

unit, to turn on the TV. The SELECT LANGUAGE

screen will be displayed.

Press

.Ji../'''

to select "ENGLISH", "ESPANOL"

(Spanish) or "FRANQAIS" (French).

[NOTE=>

• If you select "OFF", EZ SETUP will be canceled.

• When you turn on the TV for the first time, it will automati-

cally memorize the broadcasting channels and clock.

Please perform the following instructions before you press

POWER.

(1) Insert the batteries into the remote control. (See page 8.)

(2) Connect the antenna cable to the LCD TV set. (See page 9.)

(3) Connect the AC adapter to the POWER INPUT terminal

of the LCD TV set and plug in the AC cord to the wall

outlet. (See page 10.)

POWER