Sharp Aquos LC 37D64U Manuale operativo - Pagina 14

Sfoglia online o scarica il pdf Manuale operativo per TV LCD Sharp Aquos LC 37D64U. Sharp Aquos LC 37D64U 44. Sharp aquos lc-19sb25u: user guide
Anche per Sharp Aquos LC 37D64U: Manuale d'uso (32 pagine)

Stampa la pagina

Watching TV

Turning On/Off the Power

Initial Setup

When you turn on the TV for the ﬁ rst time, it will

automatically memorize the broadcasting channels

available in the region where you live. Perform the

following steps before you press TV POWER on the

remote control unit.

1. Insert the batteries into the remote control unit. (See page 7.)

2. Connect the antenna cable to the TV. (See page 7.)

3. Plug in the AC cord to the AC outlet. (See page 6.)

Language (Language setting)

Select from among 3 languages: English, French and Spanish.

Press a/b to select the desired language listed on the

screen, and then press ENTER.

Language

TV Location

Air/Cable

CH Search

TV Location

Select "Home" or "Store" for the location where you plan to

install the TV.

Press c/d to select "Home" or "Store".

Press ENTER to enter the setting.

Example

Language

TV Location

Air/Cable

CH Search

• If you select "Home", AV MODE is set to "STANDARD".

• If you select "Store", AV MODE is set to "DYNAMIC (Fixed)".

In case no remote control signal is received within 30 minutes,

AV MODE will change to "DYNAMIC (Fixed)" automatically.

• For changing the TV Location after the setting, see "EZ

Setup" on page 21.

Press POWER on the TV, or TV POWER on the remote control unit to

turn the power on.

• POWER indicator (Green): The TV is on. (After a few seconds, a window

POWER

appears with sound.)

• The initial setup starts when the TV powers on for the ﬁ rst time. If the TV has

TV POWER

been turned on before, the EZ Setup will not be invoked. See page 21 for

(On/Standby)

performing EZ Setup from the Setup menu.

Press POWER on the TV, or TV POWER on the remote control unit

again to turn the power off.

• The TV enters standby and the image on the screen disappears.

• The POWER indicator on the TV turns off.

• If you are not going to use this TV for a long period of time, be sure to remove

the AC cord from the AC outlet.

• Weak electric power is still consumed even when the TV is turned off.

English

Français

Español

Home

Store

Air/Cable (Antenna setting)

Make sure what kind of connection is made with your TV

when selecting "Air" or "Cable".

Press c/d to select "Air" or "Cable".

Press ENTER to enter the setting.

Example

Language

TV Location

Air/Cable

CH Search

CH Search (Channel search)

Channel auto search makes the TV look for all channels

viewable in the set area.

When "Air" is selected in Antenna setting:

Press c/d to select "Start", and then press ENTER.

Language

TV Location

Air/Cable

CH Search

When "Cable" is selected in Antenna setting:

Press a/b to select "Analog & Digital Search Start" to

search both analog and digital broadcasts, or to select

"Analog Search Start" to search only analog broadcasts,

and then press ENTER.

Language

TV Location

Air/Cable

CH Search

• The Channel search will start automatically.

• To exit the Channel search screen, select "Cancel", and

then press ENTER.

• If no channel is found, conﬁ rm the type of connection made

with your TV and try EZ Setup again.

(See page 21.)

Air

Cable

Start

Cancel

Analog & Digital Search Start

Analog Search Start

Cancel