Sharp Aquos LC-32AX5H Manuale operativo - Pagina 10

Sfoglia online o scarica il pdf Manuale operativo per TV LCD Sharp Aquos LC-32AX5H. Sharp Aquos LC-32AX5H 47. Lcd colour television aquos

Preparation

Setting the TV on the wall

• You can mount the TV on the wall, using the optional AN-37AG2 bracket.

• For details, refer to the instructions supplied with the optional bracket.

CAUTION

• Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service

personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper

mounting or mounting that results in accident or injury.

Hanging on the wall

Wall mount bracket. (See the bracket instructions for details.)

For wall mounting with the optional bracket, remove the stand.

Before attaching/detaching stand

• Before detaching (or attaching) stand, unplug the AC cord from the AC outlet.

• Remove all terminal covers and connected cables.

• Lay the TV down on cushioning (such as a blanket) over a table.

• Make sure two or more people perform the operation.

CAUTION

• Do not remove the stand from the TV unless using an optional bracket to mount it.

Unfasten the screw used to

secure the cover in place.

NOTE

• To attach the stand, perform the above steps in reverse order.

Regarding the angle when mounting the TV

on the wall

• The angle to which you can tilt the wall-

mounted TV is up to 5 degrees. Do not tilt it

more than the maximum angle.

• Tilt the wall-mounted TV slowly when adjusting

its angle.

Unfasten the four screws used

to secure the stand in place.

0° or 5°

Detach the stand from the TV.

(Hold the stand so it will not

drop from the edge of the base

area.)