Sharp Aquos LC-42BX5H Manuale operativo - Pagina 11

Sfoglia online o scarica il pdf Manuale operativo per TV LCD Sharp Aquos LC-42BX5H. Sharp Aquos LC-42BX5H 50. Lcd colour television

Preparation

Setting the TV on the wall

• You can mount the TV on the wall, using the optional AN-37AG2/AN-52AG1 bracket.

• For details, refer to the instructions supplied with the optional bracket.

CAUTION

• This TV should be mounted on the wall only with the AN-37AG2/AN-52AG1 (SHARP) wall mount bracket. The use

of other wall mount brackets may result in an unstable installation and may cause serious injuries.

• Installing the Liquid Crystal Television requires special skill that should only be performed by qualiﬁ ed service

personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper

mounting or mounting that results in accident or injury.

Hanging on the wall

AN-37AG2/AN-52AG1 wall mount bracket.

(See the bracket instructions for details.)

Vertical mounting

For wall mounting with the optional bracket, remove the stand.

Before attaching/detaching stand

• Before detaching (or attaching) stand, unplug the AC cord from the AC outlet.

• Remove all terminal covers and connected cables.

• Lay the TV down on cushioning (such as a blanket) over a table.

• Make sure two or more people perform the operation.

CAUTION

• Do not remove the stand from the TV unless using an optional bracket to mount it.

Unfasten the two screws used to

secure the cover in place.

NOTE

• To attach the stand, perform the above steps in reverse order.

0° or 5°

Angular mounting

1 Unfasten the four screws used

to secure the stand in place.

2 Pull the stand several

centimetres toward you.

About setting the TV angle and height adjustment

AN-37AG2

AN-52AG1

Detach the stand from the TV.

(Hold the stand so it will not drop

from the edge of the base area.)

For AN-52AG1

1 0°/5°/10°/15°/20°

2 -5/0/+5 cm

(can be moved 5 cm

up or down)