DIGISYNTHETIC DS100 Manuale di istruzioni - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per Apparecchiature di registrazione DIGISYNTHETIC DS100. DIGISYNTHETIC DS100 15. 24-bit digital dual engine multi-effect processor

Stampa la pagina

1. The Front Panel

SETUP

D 100

EQ/GATE

This button is used to select Configuration mode. Once pressed, use the

1) Setup Button-

wheel to select a different effect configuration for the selected program.

2)Parameter 1/Predelay

3)Parameter 2/Decay-

4)Input Meter/Effect Display-In Program mode, this meter displays the input signal entering the unit. In Edit

5)Number Display-In Program mode, this number display will indicate program number(decimal point indicates

a user program). In Edit mode, the display will indicate effects and parameter values.

6)Program/Data Wheel-In Program mode, this wheel is used to change programs and when the unit is in Edit

7)Program Button-This button returns the DS100 to program mode when pressed.

8)Engine A-

This button selects the Engine A effect module. Once this button is pressed, use the

-Data> wheel to change the effect used in this module.

9)Bypass-This button is used to Bypass all of the digital effects in the DS100 and allow the original dry signal

to pass through the DS100.

10)Power on/off.

11)EQ/Gate- This button(in conjunction with the four parameter buttons) are used to adjust the three band EQ

and Noise gate threshold and release. Press once to select the EQ and press twice to select the

noise gate.

12)Parameter 3/Damping-

13)Parameter 4/Level-

14)Mix/MIDI-This button is used to turn the Dry signal path On and Off and select the MIDI channel that

PARAM1

PARAM2

CLIP

-10

-20

ENGINE A

MOD

DELAY REVERB OTHER

PITCH

PARAM3

PARAM4

ENGINE B

CLIP

-10

-20

-This button selects parameter 1 for editing in conjunction with the

wheel. It is also the Predelay parameter of the Reverb effect.

This button selects parameter 2 for editing in conjunction with the

wheel. It is also the Decay parameter of the Reverb effect.

mode, it will indicate which effect is being used.

mode it is used to select effects and change parameter.

This button selects parameter 3 for editing in conjunction with the

wheel. It is also the Damping parameter of the Reverb effect.

This selects parameter 4(level) for editing in conjunction with the

wheel.

-30

PROGRAM

ENGINE A

BYPASS

MIX/MIDI

ENGINE B

STORE

POWER

<Program/

Page 4