DIGISYNTHETIC DS100 Manuale di istruzioni - Pagina 8

Sfoglia online o scarica il pdf Manuale di istruzioni per Apparecchiature di registrazione DIGISYNTHETIC DS100. DIGISYNTHETIC DS100 15. 24-bit digital dual engine multi-effect processor

To edit the Dry signal within the effect configuration of the DS100(turning it On or Off), press the <Mix/MIDI>
button once and the display will briefly read:
Dry signal is on. If you wish to turn the dry path off, simply turn the
and the display will now read:
This now indicates that the Dry signal has been turned Off creating a 100% Wet signal globally in the DS100.
To exit this mode, press the
Note: The Dry path will automatically be turned off when either a Tremolo, Panner, Vocoder, Compressor,
Rotary Speaker or Reverse Reverb effect is used in a program, since the dry signal is already included
in these effects.

3.5 Selecting the MIDI Channel and MIDI CC Information

To select the MIDI channel in which the DS100 receives program change information, from Program mode,
press the
<Mix/MIDI>
followed by:
Now turn the
<Program/Data>
selection ranges from: - ,
MIDI program change numbers will be as follows:
1-99 = Programs
100 = Effects Bypass
101 = Exit Effects Bypass
102 = Effect Bypass Toggle
103 = Selects User Program Bank
104 = Selects Factory Program Bank
To exit the MIDI channel menu, press the

3.6 MIDI CC Information

The DS100 will also receive MIDI CC information for parameter control of the following parameter:
- is turned On or Off by MIDI CC number - CC 7.
Dry Level

3.7 EQ and Noise Gate Adjustments

This editing function allows you to make key EQ and Noise gate modifications to custom tailor your sound for
each program. The procedure for both is as follows:
Page 7
ENGINE A
ENGINE B
button.
<Program>
button twice and the display will briefly read:
ENGINE A
ENGINE B
wheel to select the desired MIDI channel. The options for the MIDI channel
and
(Off).
<Program>
indicating the dry path mix and then
<Program/Data>
CLIP
-10
-20
-30
MOD
DELAY REVERB OTHER
PITCH
CLIP
-10
-20
-30
CLIP
-10
-20
-30
MOD
DELAY REVERB OTHER
PITCH
CLIP
-10
-20
-30
button.
, indicating that the
wheel counter clockwise
(this indicates MIDI channel mode),