Sharp 21LF-90H Manuale operativo - Pagina 16

Sfoglia online o scarica il pdf Manuale operativo per TV Sharp 21LF-90H. Sharp 21LF-90H 35. Typical connections
Anche per Sharp 21LF-90H: Manuale di connessione (4 pagine), Manuale operativo (34 pagine), Manuale operativo (34 pagine), Manuale di avvio rapido (4 pagine)

Stampa la pagina

ENG-2163-1548 UK-PAL-TEK SCART-FAV-STEREO-SHARP-AK44-TV1.p65

Downloaded from:

http://www.usersmanualguide.com/

If there is left only one minute of the down

counting of the timer, it is displayed auto-

matically on the upper left of the screen, and

stayed there until finishing. Then TV goes

automatically to stand-by.

Child Lock

You can use this feature to prevent children

turning on TV or changing programs or ad-

justments etc. without remote control.

The CHILD LOCK feature can be set by

or button to either ON or OFF. When

OFF is selected, there will be no difference

in the operation of your TV. When ON is se-

lected, the TV can only be controlled by the

remote control handset. In this case, the

front panel buttons (except the Power On/

Off button) will not work.

TG@@QÃUDH @S

PAA

8CDG9ÃGP8F

PAA

G6IB V6B@

@IBGDTC

Selecting Menu Language

Menu language can be chosen by pressing

or button on LANGUAGE item.

TG@@QÃUDH @S

PAA

8CDG9ÃGP8F

PAA

G6IB V6B@

@IBGDTC

To Store Settings

In Feature menu all settings are stored auto-

matically.

Installation Menu

To enter the Installation menu directly, press

the BLUE button, or

Press M button, now you are in Main

menu. In the Main menu, select INSTALL.

using

button. Then enter the In-

stall menu pressing or button.

Selecting Programme

To select programme number, you can use

button, Digit Buttons or The

Double Digit button with digit buttons.

Selecting Band

BAND can be chosen as VHF1, VHF3 or

UHF by or button.

Selecting Frequency

The frequency value is,

044 - 890 MHz for band VHF1 - VHF3 - UHF.

QSP BS6H H@

76I 9

WCA

AS@R V@I8`

'%!$

TU6I 96S9

T@6S 8C

ADI@ÃÃUVIDIB

TUPS @

FREQUENCY can be changed by

button, by the Digit buttons or by the

Double Digit button with digit buttons.

The decimal value in frequency can not be

changed by the digit buttons, it can be

changed only by the or button. The

value can be 00, 25, 50 and 75. Also

changing Fine Tuning changes the decimal

part.

Selecting Standard

The "Standard" setting is fixed to "I". You

cannot change this item's setting.

Selecting Search

To start the search process, press but-

ton for forward search or button for back-

ward search. SEARCH item blinks during

search process, since the process is

stopped or signal is found. During search

process the semi-transparent menu back-

- 15 -

06.01.2004, 15:37