Sharp 21LF-90H Manuale operativo - Pagina 20

Sfoglia online o scarica il pdf Manuale operativo per TV Sharp 21LF-90H. Sharp 21LF-90H 35. Typical connections
Anche per Sharp 21LF-90H: Manuale di connessione (4 pagine), Manuale operativo (34 pagine), Manuale operativo (34 pagine), Manuale di avvio rapido (4 pagine)

Sharp 21LF-90H Manuale operativo
ENG-2163-1548 UK-PAL-TEK SCART-FAV-STEREO-SHARP-AK44-TV1.p65
Downloaded from:
http://www.usersmanualguide.com/
If there is left only one minute of the down
counting of the timer, it is displayed auto-
matically on the upper left of the screen, and
stayed there until finishing. Then TV goes
automatically to stand-by.

Sound Mute

To cut off the sound from the TV press “ ”
button. To restore the sound press the “ ”
button again or use the “
tons, in this case the volume will start from
minimum setting.

No-Signal

No-Signal Timer Indicator
It is displayed in the middle of the screen
when no valid signal detected. It shows the
remained time for the switching to the
Stand-By mode (it takes 5 minutes when
any signal detected or no any Remote Con-
trol command is accessed). The indicator is
displayed in 3 seconds when there is no
valid signal.
After an Remote Control command (if No-
Signal Timer is active) the timer stops and if
no signal detected again the timer is initial-
ized to 5 minutes and starts 3 seconds later
again to count down.
It is not valid in AV mode.

Blue Background During No-Signal

In case, no valid signal is detected (in TV or AV
mode)
Blue Background is activated.During
search process Blue Background is not ac-
tive. But instead of it there is another feature
given; the semi-transparent menu back-
ground is made blue.
19

Volume Bar

It is displayed in the lower middle of the
screen. When a volume command is re-
ceived (pressing “
mote Control or Front panel) and no menu is
active, it stays on the screen for 3 seconds,
after the last volume command or until an-
other command is received in between.

AV Modes

+” or “-
” but-
By pressing the “
your TV to AV modes (except being in Tele-
text). Pressing this button consecutively will
switch the TV in one off the AV modes:
SCART, F- AV (Front AV )
SCART
supports the RGB mode. But if there
is some colour problem in SCART modes,
please force the AV mode to RGB mode.
In order to quit the AV mode press the “
button.
- 19 -
+” or “-
” by Re-
(;7
“ button you can switch
or RGB.
79
06.01.2004, 15:37
”