Sharp CD-BK300W Manuale operativo - Pagina 23

Sfoglia online o scarica il pdf Manuale operativo per Impianto stereo Sharp CD-BK300W. Sharp CD-BK300W 34.

Playing Karaoke

To protect the speakers from shock noise and to avoid disturbing

noises, set the MIC LEVEL control to MIN.

Connect the microphone to the MIC socket.

z Use a microphone with a 6.3 mm (1/4") plug, an impedance of 600 ohms.

z If a microphone whose sensitivity is too high is used, howling may be gener-

ated.

z Unidirectional microphone is more appropriate for vocal use.

z Use a standard plug adaptor when using a microphone with a 3.5 mm (1/8")

diameter plug.

Press the ON/STAND-BY button to turn the power on.

Press the desired function selector button to select the corre-

sponding audio source.

If you wish to start recording with the microphone, refer to the "Recording from a

CD (CDs)" on page 25.

Adjust the volume of the audio source using the VOLUME control.

Rotate the MIC LEVEL control towards MAX to increase the micro-

phone volume and towards MIN to decrease the microphone vol-

ume.

Press the ECHO LEVEL

button on the remote control to increase

the microphone echo, and the ECHO LEVEL

the microphone echo.

Note:

When excessively loud signals enter the microphone, your voice may be distorted

depending on the devices connected. If this happens, lower the microphone volume.

If squealing occurs:

z Reduce the microphone volume.

z Change the direction that the microphone faces.

z Reduce the volume of the main unit.

z Move the microphone away from the speaker.

Caution:

z When not using the microphone, remove the microphone plug from the MIC

socket.

z When connecting or disconnecting the microphone plug, set the MIC LEVEL con-

trol to MIN.

button to decrease

ENGLISH

E-22