Sharp CD-C491H Manuale operativo - Pagina 4

Sfoglia online o scarica il pdf Manuale operativo per Impianto stereo Sharp CD-C491H. Sharp CD-C491H 48. Mini component system

Stampa la pagina

1. Specifications

<P=002>

PRECAUTIONS

General

';ease make sure that the unit is positioned in a well ven-

tilated area and that there is at least 10 cm (4") of free

space along the sides and back. There must also be a

minimum of 50 cm (19-11/16") of free space on the top

of the unit.

Do not use oil, solvents, petrol, paint thinners or insecti-

cides on the unit.

Do not expose the unit to moisture, to temperatures higher

than 60˚C (140˚F) or to extreme low temperatures.

Keep the unit away from direct sunlight, strong magnetic

fields, excessive dust, humidity and electronic/electrical

equipment (home computers, facsimiles, etc.) which gen-

erates electrical noise.

Hold the AC power plug by the head when removing it

from the AC socket, since pulling the lead can damage

internal wires.

When cleaning the heads, pinch rollers, etc, remove the

AC power plug from the AC socket as the unit contains

high voltages.

Do not remove the outer cover, as this may result in elec-

tric shock. Refer internal service to your local SHARP ser-

vice facility.

Use the unit on a firm, level surface free from vibration,

and do not place anything on the top of the unit.

If the unit does not work properly whilst in use, disconnect

the AC power lead from the AC socket. Plug the AC power

lead back in, and then press the POWER button to turn

the power on.

If an electrical storm is taking place near you, it is sug-

gested that you disconnect the AC power lead from the

AC socket for safety.

Warning:

The voltage used must be the same as that specified on

this unit. Using this product with a higher voltage other than

which is specified is dangerous and may result in a fire or

other type of accident causing damage. SHARP will not be

held responsible for any damage resulting from use of this

unit with a voltage other than that which is specified.

Volume control

The sound level at a given volume setting depends on a

combination of speaker efficiency, location and various other

factors.

It is advisable to avoid exposure to high volume levels, which

occur whilst turning the unit on with the volume control set-

ting up high, or whilst continually listening at high volumes.

Condensation

Sudden temperature changes, storage or operation in an

extremely humid environment may cause condensation in-

side the cabinet (CD pickup, tape heads, etc.) or on the

transmitter LED on the remote control.

Condensation can cause the unit to malfunction.

If this happens, leave the power on with no disc (or cassette)

in the unit until normal playback is possible (about 1 hour).

Wipe off any condensation on the transmitter LED with a

soft cloth before operating the unit.

Compact discs are fairly resistant to damage, however

mistracking can occur due to an accumulation of dirt on the

disc surface.

Follow the guidelines below for maximum enjoyment from

your CD collection and player.

CD-C491H(SUK) TINSE0229AWZZ

Care of compact discs

Do not write on either side of the disc, particularly the non-label

side. Signals are read from the non-label side. Do not mark

this surface.

Keep your discs away from direct sunlight, heat, and excessive

moisture.

Always hold the CDs by the edges. Fingerprints, dirt, or water

on the CDs can cause noise or mistracking. If a CD is dirty

or does not play properly, clean it with a soft, dry cloth, wiping

straight out from the centre, along the radius.

Cassette tape

This deck features an auto tape selector. Just load a tape,

and the tape formula being used will be sensed automat-

ically.

For playback, use normal (low-noise), CrO

for the best sound. For recording, use normal (low-noise)

or CrO

tape. Metal tape cannot be used for recording.

Do not use C-120 tapes, tapes with large diameter reels,

or poor-quality tapes, as they may cause malfunctions.

Before loading a tape into the cassette compartment,

tighten the slack with a pen or pencil.

Cassettes have removable tabs which prevent accidental

recording or erasing from taking place. Removing the tab

will protect the corresponding side from being erased.

Cover the tab holes with adhesive tape to erase or record

again.

When covering erasure prevention tab holes, do not cover

the CrO

and metal detection holes located between them.

Otherwise, the deck will sense the tape as normal tape.

TAPE 1: Playback only.

TAPE 2: Playback or record.

Side A (1)

Tab for side B (2)

Tab for side A (1)

Detection hole

YES

Correct

or metal tape