Sharp CD-DP2400E Manuale operativo - Pagina 20

Sfoglia online o scarica il pdf Manuale operativo per Impianto stereo Sharp CD-DP2400E. Sharp CD-DP2400E 33. Mini component system
Anche per Sharp CD-DP2400E: Manuale rapido (4 pagine)

Stampa la pagina

1. Specifications

Listening to the memorised station

CD-DP2400E

! Memorising a station

You can store 40 AM and FM stations in memory and recall them at the push of a but-

ton. (Preset tuning)

Perform steps 1 - 3 in "Listening to the radio" on page 19.

Press the MEMORY/SET button to enter the preset tuning saving

mode.

Within 30 seconds, press the PRESET ( or ) button to select the

preset channel number.

Store the stations in memory, in order, starting with preset channel 1.

Within 30 seconds, press the MEMORY/SET button to store that

station in memory.

If the "MEMORY" and preset number indicators go out before the station is mem-

orised, repeat the operation from step 2.

Repeat steps 1 - 4 to set other stations, or to change a preset sta-

tion.

When a new station is stored in memory, the station previously memorised will

be erased.

Note:

The backup function protects the memorised stations for a few hours should there be

a power failure or the AC power lead disconnection.

! To recall a memorised station

Press the PRESET (

) button for less than 0.5 seconds to select

the desired station.

Preset channel

! To scan the preset stations

The stations saved in memory can be scanned automatically. (Preset memory scan)

Press the PRESET (

) button for more than 0.5 seconds.

The preset number will flash and the programmed stations will be tuned in se-

quentially, for 5 seconds each.

Press the PRESET (

) button again when the desired station

is located.

! To erase entire preset memory

1 Press the ON/STAND-BY button to enter the power stand-by mode.

2 Whilst pressing down the TUNER (BAND) button and the X-BASS/DEMO button,

press the ON/STAND-BY button until "TUNER CL" appears.

01/7/17

CD-DP2400E_2.fm

Frequency and frequency band