Sharp CD-E250E Manuale operativo - Pagina 18

Sfoglia online o scarica il pdf Manuale operativo per Impianto stereo Sharp CD-E250E. Sharp CD-E250E 32. Mini component system
Anche per Sharp CD-E250E: Manuale operativo (32 pagine)

Stampa la pagina

CD-E250E

Downloaded From Disc-Player.com Sharp Manuals

Advanced CD playback (continued)

" Programmed play

You can choose up to 32 selections for playback in the order you

like.

Whilst in the stop mode, press

one of the

1 -

3 buttons on

the remote control to select

the desired disc.

Press the

but-

ton to select the desired track.

Selected track number

Press the MEMORY/SET (MEMORY) button to save the

track number.

When the track is memorised, "MEMORY" will appear.

Repeat steps 1 - 3 for other tracks. Up to 32 tracks can be

programmed.

If you make a mistake, the programmed tracks can be cleared

by pressing the CLEAR button.

Press the

button to start playback.

To clear the programmed selections:

Whilst the "MEMORY" indicator is lit, set the

CD to the stop mode and then press the

CLEAR button.

Each time the button is pressed, one track will

Selected disc number

be cleared, beginning with the last track pro-

grammed. When all the tracks are cleared,

"MEMORY" will disappear.

Adding tracks to the programme:

If a programme has been previously stored, the "MEMORY" indica-

tor will be displayed. Then follow steps 1 - 3 to add tracks. The new

tracks will be stored after the last track of the original programme.

Notes:

! Opening the disc tray automatically cancels the programmed

sequence.

! Even if you press the ON/STAND-BY button to enter the stand-by

mode or change the function from CD to another, the pro-

grammed selections will not be cleared.

! During programme operation, random play is not possible.

" Care of compact discs

Playback order

Compact discs are fairly resistant to damage, however mistracking

can occur due to an accumulation of dirt on the disc surface. Follow

the guidelines below for maximum enjoyment from your CD collec-

tion and player.

! Do not write on either side of the disc, particularly the non-label

side from which signals are read. Do not mark this surface.

! Keep your discs away from direct sunlight, heat, and excessive

moisture.

! Always hold the CDs by the edges. Fingerprints, dirt, or water on

the CDs can cause noise or mistracking. If a CD is dirty or does

not play properly, clean it with a soft, dry cloth, wiping straight out

from the centre, along the radius.

03/2/17

YES

Correct

CD-E250E(E)2.fm