Sharp CD-ES77 Manuale operativo - Pagina 12

Sfoglia online o scarica il pdf Manuale operativo per Impianto stereo Sharp CD-ES77. Sharp CD-ES77 36. Sharp mini component system cd-es700 cd-es77

CD-ES700

System connections (continued)

CD-ES77

! AC power connection

After checking all the connections have been made correctly, plug

the AC power cord of this unit into the AC outlet. If you plug in the

unit first, the unit will enter the demonstration mode.

Notes:

" The unit will start the tape initialization when plugged in to the AC

outlet. During this process, an initializing sound will be heard and

the unit cannot be turned on. Wait until the process is finished.

" Unplug the AC power cord from the AC outlet if the unit will not be

in use for a prolonged period of time.

Cooling fan:

This product is equipped with a cooling fan inside, which begins to

run at a specified volume level for better heat radiation.

AC outlet

(AC 120 V, 60 Hz)

! Demonstration mode

The first time the unit is plugged in, the

unit will enter the demonstration mode.

You will see words scroll.

To cancel the demonstration

mode:

When the unit is in the power stand-

by mode (demonstration mode),

press the X-BASS/DEMO button.

The unit will enter the low power

consumption mode.

To return to the demonstration mode:

When the unit is in the power stand-by mode, press the X-BASS/

DEMO button again.

Note:

When the power is on, the X-BASS/DEMO button can be used to se-

lect the extra bass mode.

! Outdoor FM antenna

Use an outdoor FM antenna if you require better reception. Consult

your dealer.

75 ohm

coaxial cable

Note:

When an outdoor FM antenna is used, disconnect the supplied FM

antenna wire.

Outdoor

FM antenna