Sharp CD-XP350W Manuale operativo - Pagina 9

Sfoglia online o scarica il pdf Manuale operativo per Impianto stereo Sharp CD-XP350W. Sharp CD-XP350W 32.
Anche per Sharp CD-XP350W: Manuale di servizio (4 pagine)

Stampa la pagina

System connections

AM loop aerial
Surround speaker
(Right)
FM aerial
Front speaker
(Right)
Removing the transport screw
Before turning the power on, be sure to remove the transport screw
on the back of the unit using a flat head screwdriver or a coin.
Note:
This screw is required when transporting the unit again. Please keep it (see page
29).
Supplied FM aerial:
Surround speaker
Connect the FM aerial wire to the FM 75
(Left)
OHMS terminal and position the FM aerial wire
in the direction where the strongest signal can
be received.
Transport screw
Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP
socket. Position the AM loop aerial for opti-
mum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with
screws (not supplied).
Note:
Placing the aerial on the stereo system or near the AC power lead may cause noise
pickup. Place the aerial away from the stereo system for better reception.
Installing the AM loop aerial:
< Assembling >
Front speaker
(Left)
External FM aerial:
Use an external FM aerial if you require better reception. Consult your dealer.
Wall socket
(See page 10.)
Note:
When an external FM aerial is used, disconnect the supplied FM aerial wire.

Aerial connection

< Attaching to the wall >
Wall
75 ohm
coaxial
cable
02/1/23
CD-XP350W(A)E1.fm
CD-XP350W
ENGLISH
Screws (not supplied)
External
FM aerial
E-8