Sharp XL-MP333H Manuale operativo - Pagina 20

Sfoglia online o scarica il pdf Manuale operativo per Impianto stereo Sharp XL-MP333H. Sharp XL-MP333H 49. Micro component system

Stampa la pagina

Setting the clock

XL-MP333H
XL-MP444H
ENGLISH
In this example, the clock is set for the 24-hour (0:00) display.
1
Press the CLOCK button and within 8 seconds, press the

MEMORY/SET button.

2
Within 30 seconds, press the PRESET (
select 24-hour or 12-hour display and then press the MEM-
ORY/SET button.
"0:00"
The 24-hour display will appear.
(0:00 - 23:59)
"AM 12:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
E-13
3
Within 30 seconds, press the PRESET (
adjust the hour and then press the MEMORY/SET button.
Press the PRESET (
by 1 hour. Hold it down to advance continuously.
4
Within 30 seconds, press the PRESET (
adjust the minutes and then press the MEMORY/SET but-
ton.
Press the PRESET (
by 1 minute. Hold it down to advance continuously.
To confirm the time display:
Press the CLOCK button.
The time display will appear for
about 8 seconds.
Note:
The "CLOCK" or time will flash at the push of the CLOCK button
when the AC power supply is restored after a power failure or
or
) button to
unplugging the unit.
Readjust the clock as follows.
To readjust the clock:
Perform "Setting the clock" from step 1. If the "CLOCK" is not flash-
ing in step 1, step 2 (for selecting the 24-hour or 12-hour display) will
be skipped.
To change the 24-hour or 12-hour display:
1
Clear all the programmed contents. [Refer to "Clearing all the
memory (reset)" on page 38 for details.]
2
Perform "Setting the clock" from step 1.
04/5/26
XL-MP333H_MP444H_E.fm
or
) button to
or
) button once to advance the time
or
) button to
or
) button once to advance the time
TINSZA022SJZZ