Supplementary explanation of key operation
for key operator programs
KEY OPERATOR PROGRAMS
N/W SCANNER SETTINGS
DEFAULT DISPLAY SETTINGS
INITIAL RESOLUTION SETTING
DEFAULT SENDER SET
The name of the program category or particular item to be set will appear on the touch key. A touch of the key
will select the item displayed.
G Check mark boxes are touch keys that show the status of selections. A box with a check mark means the
function is "on" (enabled) and an unchecked box means the function is "off" (disabled). Alternate touches of
a box will change the on/off status.
If a program step requires more than one screen to display all available settings for a program step,
arrow touch keys on the setting screens allow access to the available selections on all screens. If a selection is
accepted on one of the screens by a touch of the [OK] key, the display will return through the previous selection
screens within the same setting step to confirm the settings. After all settings are confirmed, the [OK] key must
be pushed again to advance to the next step.
The currently set numerical value is displayed.
Numerical values can be set by touching the
SETTING PROGRAMS
The setting programs for the network scanner feature of the machine are explained here.
Network scanner settings
The following programs are available:
G
Default display settings
G
The number of direct address keys displayed setting
G
Initial resolution setting
G
Scan complete sound setting
G
Default sender set
G
Compression mode at broadcasting
G
Initial file format setting
G
Maximum size of e-mail attachments
Default display settings
You can select the initial display that appears when
you press the [IMAGE SEND] key to change to
scanner mode or when you press the [CA] key in
scanner mode. Normally the initial display is set to
the
Condition setting screen
The following three selections are available:
G Condition setting screen
G Address directory (ABC)
G Address directory (Group)
When an address directory (ABC or Group) is
selected, the selected index of that address
directory
(page
15) is set as the initial screen.
THE NUMBER OF DIRECT ADDRESS
KEYS DISPLAYED SETTING
SCAN COMPLETE SOUND SETTING
COMPRESSION MODE AT
BROADCASTING
and
(page 14).
TABLE OF CONTENTS
KEY OPERATOR PROGRAMS
These
keys
available on setting screens that
require the entry of numerical values.
OK
1/2
keys.
When [SWITCH AUTOMATICALLY TO COPY
MODE SCREEN] is selected, the display will
automatically switch to the copy mode screen if no
action is taken in the image send mode screen for
20 seconds.
The number of direct address keys
displayed setting
The number of one-touch keys displayed in each
address directory screen can be changed from 6
(the normal setting) to 4 or 9.
Touch [4], [6], or [9] to select the desired number.
NOTE
For the key name that appears in each one-touch
key, a maximum of 18 characters can appear when
the number of one-touch keys displayed is set to 4 or
6. A maximum of 10 characters can appear when the
number of one-touch keys displayed is set to 9.
37
and
indicator
are
(1 999)
20
and
Stampa la pagina