Sharp AR-M450 Imager Manuale operativo - Pagina 7

Sfoglia online o scarica il pdf Manuale operativo per Stampante All in One Sharp AR-M450 Imager. Sharp AR-M450 Imager 40. Ar-m280 | ar-m350 | ar-m450 operation manual (for network scanning)
Anche per Sharp AR-M450 Imager: Opuscolo e specifiche (11 pagine), Manuale delle parti (30 pagine), Manuale operativo (32 pagine), Manuale di ricarica (8 pagine)

Stampa la pagina

Touch Panel (basic screen of copy mode)

When the copy mode key is pressed, this display screen will appear showing the basic copy mode selections.

(For the display screens for other modes, see the respective operation manuals for those modes.)

READY TO SCAN FOR COPY.

SPECIAL MODES

2-SIDED COPY

OUTPUT

Message display

Basic status messages are displayed here.

[INTERRUPT] key display area

When interrupt copy is available, the [INTERRUPT]

key will be displayed here. When an interrupt copy

job is being run, a [CANCEL] key will be displayed

here to be used for canceling the interrupt copy job.

Copy quantity display

Displays the selected number of copies before the

[START] key is pressed or the number of completed

copies after the [START] key is pressed. A single

copy can be made when "0" displayed.

[2-SIDED COPY] key (page 9)

Touch to display the duplex copy mode setting

screen. A highlighted selection on the screen will

indicate the currently selected mode. The setting

screen can be closed by touching the [OK] key on

the setting screen whether or not a selection change

was made.

[OUTPUT] key (page 10)

Touch to display the output mode setting screen. A

highlighted selection on the screen will indicate the

currently selected mode. The setting screen can be

closed by touching the [OK] key on the setting screen

whether or not a selection change was made.

[SPECIAL MODES] key

Touch to display the special modes selection screen.

The functions that can be selected by touching this

key are described on page 19.

ORIGINAL

A4R

Paper size display

The display shows the location of the paper trays, the

size of the paper in the trays and the approximate

amount of paper loaded in each tray. The approximate

amount of paper in a tray is indicated by

For changing the paper size in a tray refer to page

1-16 of the "Operation manual (for printer operation

and general information)".

Original size display

The original paper size will be displayed when

originals are placed on the document glass or in the

document feeder.

Exposure display and [EXPOSURE] key (page 15)

A touch of the [EXPOSURE] key will open the

exposure selection window. A highlighted key on the

exposure window indicates which exposure mode

(AUTO, TEXT, TEXT/PHOTO or PHOTO) is currently

selected. When an exposure mode other than AUTO

is selected, an exposure level scale will also appear

in the window.

Paper select display and [PAPER SELECT] key

(page 9)

Displays the selected paper size. When the auto

paper select mode has been selected, "AUTO" will

be displayed.

A touch of the [PAPER SELECT] key will open the

paper selection window. When a selection is made,

the selection window will close. To close the window

without making a selection touch the key again

Copy ratio display and [COPY RATIO] key

(page 17)

Displays the selected copy ratio.

Touch to display the reduction and enlargement copy

ratio selection screen.

PART NAMES AND FUNCTIONS

AUTO

EXPOSURE

AUTO

PAPER SELECT

100%

COPY RATIO