Sharp AR-M455U Manuale di riferimento rapido - Pagina 9
Sfoglia online o scarica il pdf Manuale di riferimento rapido per Stampante All in One Sharp AR-M455U. Sharp AR-M455U 33. Digital multifunctional imager
Stampa la pagina
Simulation List (Main/Sub) (cont'd)
26
3
Used to set the specifications of the auditor. Setting must be made according to the auditor use conditions.
5
Used to set the count mode of the total counter and the maintenance counter.
6
Used to set the specifications (paper, document detection, etc.) of the destination.
10
Used to set the network scanner trial mode.
18
Used to set YES/NO of toner save operation. (This function is valid only in Japan and UK versions.) [Depends on the
destination setting of SIM26-6.] For the other destinations, the same setting can be made by the user program P22.)
30
Used to set the operation mode conforming to the CE mark (Europe safety standards). (Conforming to soft start when driving
the fusing heater lamp.)
35
Used to set whether the same continuous troubles are displayed as one trouble or the series of troubles with SIM 22-4 when the
same troubles occur continuously.
38
Used to set CONTINUE/STOP of printing when maintenance timing is over and the count value reaches 110% of replacement
timing (life).
41
Used to set the automatic magnification ratio selection (AMS) in the pamphlet mode.
50
Black-White reverse YES/NO setting.
52
Used to set whether non-print paper (insertion paper, cover paper) (blank image print paper) is counted up or not.
68
Used to set ENABLE/DISABLE of the CA key cancel function of print stop.
27
1
Used to set the specifications for operations in case of communication trouble between the host computer and MODEM
(machine side). (When communication trouble occurs between the host computer MODEM and the machine, the self diag
display (U7-00) is printed and setting for inhibition of print or not is made.)
5
Used to enter the machine tag No. (This function allows to check the tag No. of the machine with the host computer.)
30
1
Used to check the operation of sensors and detectors in other than the paper feed section and the operations of the related
circuits.
2
Used to check the operation of sensors and detectors in the paper feed section and the related circuits.
Quick Reference Guide: AR-M355U/M455U
Simulation List (Pg. 4 of 11)
9