Sharp MX 5500N - Color Laser - Copier Manuale di risoluzione dei problemi - Pagina 16

Sfoglia online o scarica il pdf Manuale di risoluzione dei problemi per Stampante All in One Sharp MX 5500N - Color Laser - Copier. Sharp MX 5500N - Color Laser - Copier 48. Digital full colour multifunctional system
Anche per Sharp MX 5500N - Color Laser - Copier: Opuscolo e specifiche (12 pagine), Manuale di istruzioni per l'uso (14 pagine), Manuale (49 pagine), Manuale di sicurezza (28 pagine)

Stampa la pagina

Problem

A tray, finisher, or

other peripheral

device installed on the

machine cannot be

used.

Problems related to print results

Problem

The image is grainy.

The image is too light

or too dark.

Colours are off.

Text and lines are faint

and difficult to see.

Point to check

Have the peripheral devices that are

installed on the machine been

configured in the printer driver?

Point to check

Are the printer driver settings

appropriate for the print job?

(Windows)

Does the image (particularly a photo)

need correction?

(Windows)

Did you perform "Registration

Adjustment"?

Was colours data printed in black and

white?

(Windows)

Solution

Open the printer properties and click the [Auto

Configuration] button on the [Configuration] tab.

(Windows)

* If auto configuration cannot be executed, see the

Software Setup Guide.

Solution

If you are using the PCL printer driver, you can set the

resolution to [600 dpi] or [300 dpi] in the print settings at

the time of printing. When you need a very clear image,

select [600 dpi].

If you are using the PS printer driver, you can set the

resolution to [600x600 dpi] or [1200x600 dpi] (only for

black and white printing).

The resolution setting is selected in the [Advanced] tab

of the printer driver properties window.

Brightness and contrast can be corrected by performing

[Color Adjustment] on the [Color] tab of the printer

driver. These settings can be used for simple

corrections when you do not have image editing

software installed on your computer.

Ask your administrator to perform "Registration

Adjustment".

➞ System Settings (Administrator) > "Device Control" >

"Other Settings" > "Registration Adjustment"

If the colour tones are off, perform "Auto Colour

Calibration". (If the colours are still off after calibration,

repeating calibration may improve the results.)

➞ System Settings (Administrator) > "Printer Settings" >

"Auto Colour Calibration"

When colour text and lines are printed in black and

white, they may become faint and difficult to see. To

have colour text or lines (areas) that are faint converted

to black, select [Text To Black] or [Vector To Black] on

the [Color] tab of the printer driver. (Raster data such as

bitmap images cannot be adjusted.)