Sharp MX-2310U Manuale di configurazione del software - Pagina 29

Sfoglia online o scarica il pdf Manuale di configurazione del software per Stampante All in One Sharp MX-2310U. Sharp MX-2310U 46. Digital full color multifunctional system
Anche per Sharp MX-2310U: Manuale di avvio (28 pagine), Manuale di avvio (24 pagine), Manuale di avvio (24 pagine), Manuale operativo (19 pagine), Scheda tecnica (2 pagine), Opuscolo e specifiche (13 pagine), Manuale di servizio (20 pagine)

Stampa la pagina
Sharp MX-2310U Manuale di configurazione del software

INSTALLING THE SCANNER DRIVER

The scanner driver (TWAIN driver) can only be used when the machine is connected to a network. When the scanner
driver is installed, PC scan mode of the image send function can be used.
Supported operating systems: Windows 2000
* Administrator's rights are required to install the software.
After performing step 1 through step 5 of "OPENING THE SOFTWARE SELECTION SCREEN (FOR ALL
SOFTWARE)" (page 8), continue the steps below.
1
Click the [Scanner Driver (TWAIN)]
button.
2
Follow the on-screen instructions.
Read the message in the window that appears and click
the [Next] button.
3
When the finish setup window appears,
click the [OK] button.
4
Click the [Close] button in the window
of step 1.
After the installation, a message prompting you to
restart your computer may appear. If this message
appears, click the [Yes] button to restart your
computer.
*
*
*
*
/XP
/Server 2003
/Vista
This completes the installation. Next, configure the
IP address of the machine in the scanner driver.
When the scanner driver is installed, the "Select Device"
utility is also installed.
The IP address of the machine is configured in the
scanner driver using "Select Device".
5
Click the [start] button, select [All
Programs] ([Programs] in Windows
2000), select [SHARP MFP TWAIN K],
and then select [Select Device].
6
Click the [Search] button.
If you know the IP address, you can click the [Input] key
and enter the IP address without searching.
*
*
/Server 2008
/7
27