Digit-KD VISION series Manuale di istruzioni - Pagina 2

Sfoglia online o scarica il pdf Manuale di istruzioni per Tastiera Digit-KD VISION series. Digit-KD VISION series 12. Remote keypad with lcd display

Stampa la pagina
ENGLISH
Congratulations on your purchase of the Digit-KD, a remote keypad with LCD display for
use with the VISION series control panels.
The unit has been built using the most advanced microprocessor technology and production
methods. Tested by means of special computerized test jig, the Digit-KD offers security and
durability in time.

1.0. DESCRIPTION

The Digit-KD has a 16 x 2 LCD characters with which you may:
Arm the control panel in the modes "Day", "Night" and "Test-Control" (Day and Night)
Disarm the control panel
By-pass zones
Visualize the alarms detected which indicate (alarm memory)
The keypad is supplied with an access code which must be self-learned by the control panel
and 5 LED.
The LCD display immediately supplies all the information regarding the system status.
In case of alarm, the last event detected will remain visualized on the display, other events
detected can be easily visualized.
Other characteristics:
- Back light illumination of all buttons and display for approximately 30 seconds after a button
is pressed. In the case that more than one button is pressed, the 30 seconds starts from the
last operation executed.
- Beep confirmation of each button pressed.

2.0. CONNECTIONS

Terminal
block of the
VISION
control panel
KEY
50
12 V
49
GND
48
C
47
B
46
A
45
Page 2
Back view of
keypad
Keypad
terminals
12 V
C B A
KEY GND
Digit-KD instruction manual