Sharp PN-L802B Manuale di configurazione del software - Pagina 33

Sfoglia online o scarica il pdf Manuale di configurazione del software per Stampante All in One Sharp PN-L802B. Sharp PN-L802B 46. Touchscreen
Anche per Sharp PN-L802B: Manuale operativo (9 pagine), Manuale operativo (48 pagine), Manuale di configurazione (28 pagine), Manuale d'uso (13 pagine), Manuale di avvio rapido (1 pagine), Manuale di avvio rapido (1 pagine), Manuale di avvio rapido (1 pagine), Manuale di avvio rapido (28 pagine), Manuale di avvio rapido (1 pagine), Manuale di avvio (24 pagine), Garanzia (2 pagine), Manuale di connessione (1 pagine), Opuscolo e specifiche (4 pagine)

Select [SC2 TCP/IP Port] and then click

the [New Port] button.

• The "SC2 TCP/IP Port" is added when the printer

driver is installed using a "Custom installation" with

"LPR Direct Print (Specify Address/Auto Search)"

selected.

• If the printer driver is installed using a "Custom

installation" with "IPP" selected, the [SC-Print2005

Port] is added. If you need to change the printer port

when the machine is connected to an intranet or a

wide area network (WAN) using the IPP function,

select [SC-Print2005 Port], click the [New Port]

button, and follow the on-screen instructions to

create the port again.

Changing to a Standard TCP/IP Port

If the machine is being used on an IPv6 network, change the port to a port created using the operating system's

"Standard TCP/IP Port".

Follow steps 1 to 3 of "CHANGING THE

PORT" (page 30).

Create the new port.

(1) (2)

(3)

(1) Enter the machine's IP address.

☞

Checking the IP address of the machine

(page 7)

(2) Make sure that [LPR] is selected.

(3) Make sure that [lp] is entered.

(4) Click the [OK] button.

Click the [Close] button in the screen of

step 4.

Make sure the created printer port is

selected in the printer properties

window and then click the [Apply]

button.

Select [Standard TCP/IP Port] and then

click the [New Port] button.

CHANGING THE PORT

(4)