Sharp SJ-47L-A2G-A2A Manuale di servizio - Pagina 17
Sfoglia online o scarica il pdf Manuale di servizio per Frigorifero Sharp SJ-47L-A2G-A2A. Sharp SJ-47L-A2G-A2A 32.
Stampa la pagina
(2)-2 Insert the terminals of Lead EV-cover ass'y to
Fan motor.
(2)-3 Fix two Motor cushions to Fan motor, and set it
at Fan motor holder A and B.
Then fix with Tapping screw.
Motor cushion
Fan motor
holder A
Lead EV-cover ass'y
Figure A-8
(3) Setting of Fan motor ass'y , Defrost thermo. ass'y and Fuse ass'y.
Lead e.v cover
ass'y
E.v cover sealer C
Take out lead wire
from square hole to
front and fix with
L-band C, then seal
with E.v cover sealer C
Aluminum tape
Turn up lead wire
Detail of G
Fan motor
holder B
Tapping
screw
Fan motor
RED
BROWN
E.v cover
Tapping screw
L-band C
Tapping screw
Set metal side below
G
H
H
Fuse ass'y
Aluminum tape
[back side]
Fuse ass'y
ATTENTION
E.v cover
sealer E
SEC. H H
[Front side]
Figure A-10
(2)-4 Set Fan clamp to Propeller fan 100 and insert
it to the shaft of Fan motor.
D
Fan clamp
Propeller
fan 100
+
4 0.5mm
Shaft
Detail of D
Figure A-9
more than 3.5mm
Aluminum tape
L-band C
F
F
Defrost thermo.
ass'y
Defrost thermo.
ass'y
Aluminum tape
L-band C
E.v cover sealer E
17
SJ-43L-A2
SJ-47L-A2
Fan clamp
Slit
Slit of each Fan clamp
and Propeller fan
should not be at same position.
Note
Propeller fan should not be
taken out from shaft when
pulled by 3 kgf.
more than 3.5mm
[front side]
CUT
Not come out of claw.
SEC. F F