Crestron CLS-SLVS1A Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Interruttore Crestron CLS-SLVS1A. Crestron CLS-SLVS1A 11. Stand-alone wall box switch

Stampa la pagina

CLW-SW1, SWS1, & SLVS1(W/A/B)

Buttons of CLW-SW1, -SWS1, and -SLVS1

Button

Mode Selection Switch

(-SW1 & -SWS1 Only)

OFF

When the mode selection switch is in the "OFF" position,

the pushbutton will not have any function and the load is

disconnected from the power source. This must be used

when changing light bulbs to ensure that the load is fully

disconnected from power.

ADJ

When the switch is in the ADJ position, pressing and

holding the pushbutton will set a delay time for

deactivating the load when the switch is in the PRE

position. To set the delay time, press and hold the

pushbutton for the desired amount of time delay and

release. When the pushbutton is released, the LED will

flash three times to confirm the time delay setting. When

done, return the switch to the PRE position.

NOTE: If a time delay is not set, the delayed-off feature

is disabled by default.

PRE

When the switch is in the PRE position, the load can be

manually activated and deactivated with the pushbutton.

Pressing the pushbutton will deactivate the load after a

delay that was set when the switch was in the ADJ mode.

During the delay, the LED will flash. Tapping the

pushbutton during the delay will deactivate the load

without a delay.

NOTE: The device may be warm to the touch during

operation. This is normal.

6 • Stand Alone Wall Box Switch: CLW-SW1, SWS1, & SLVS1

Setup & Programming

Required Software

Software

TASK

REQUIRED SOFTWARE VERSION

Program control

SIMPL™ Windows

system to operate

2.07.32 or later with SIMPL+ Cross

CLW-SW1.

Compiler version 1.1 or later and

Library update 387 or later; Also

requires Crestron Database

version 18.1.5 or later.

Upload program

Crestron Toolbox 1.02.29 or later.

and firmware.

Program with

Crestron D3 Pro™ version 2.1.7 or

simple wizards for

later with D3 Pro Templates

lighting systems

version 2.0.1 or later. Refer to

using a CLW-SW1

software release notes or Crestron

(optional but

website for other required Crestron

recommended).

software packages.

Setup

The Net ID of the CLW-SW1 has been factory set to 82.

The Net IDs of multiple CLW-SW1 devices in the same

system must be unique. Net IDs are changed from a

personal computer (PC) via the Crestron Toolbox. When

setting the Net ID, the Net ID of each unit must match an

ID code specified in the SIMPL Windows program.

For more details, refer to the Crestron Toolbox help file.

D3 Pro

Crestron D3 Pro Software provides all the tools necessary

to create a complete Crestron Lighting System for

residential applications. The lighting system includes the

control system program, touchpanel screens and keypad

programming, documentation, and real-time lighting

adjustment capabilities. As with all Crestron software, the

D3 Pro software provides extensive right-click and drag-

and-drop functionality, in addition to convenient

keyboard shortcuts for frequently used functions and

commands.

For additional details, download D3 Pro from the

Crestron website and examine the extensive help file.

SIMPL Windows

SIMPL Windows is Crestron's premier software for

programming Crestron control systems.

NOTE: While SIMPL Windows can be used to program

the CLW-SW1, it is recommended to use D3 Pro for

configuring a Crestron lighting system.

•

In Configuration Manager, incorporate a CLW-SW1

into the system by dragging the CLW-SW1 from the

Installation Guide – DOC. 6251A

version