Sharp SJ-XP470HB Manuale operativo - Pagina 5
Sfoglia online o scarica il pdf Manuale operativo per Frigorifero Sharp SJ-XP470HB. Sharp SJ-XP470HB 16.
Stampa la pagina
Installation
Installation
1
Keep adequate ventilation space around the refrigerator.
The figure shows the
•
minimum required space
for installing the refrigerator.
The amount of space
around the refrigerator
affects the amount of
power consumption.
Insufficient spacing will
•
decrease cooling efficiency
and increase energy consumption.
This may reduce the life of the unit and void warranty.
•
If using the refrigerator in the smaller space
dimension than figured, it may cause temperature
rise in the unit, loud noise and failure.
•
The space between the rear of the refrigerator and
the wall should be 50 mm or more.
Overall space required in use
895 mm
2
Use the two front the adjustable feet to place the
refrigerator flatly and firmly on the floor.
Adjustable foot
3
Connect the appliance via a correctly installed socket.
Note
• Position your refrigerator so that the plug is accessible.
•
Keep your refrigerator out of direct sunlight and do not
place next to heat generating appliance.
Do not place your refrigerator directly on the ground.
•
Insert suitable stand such as wooden board under the
refrigerator.
4
100mm
or more
50mm
50mm
or more
or more
1380mm
(2 pcs.)
Before using your refrigerator
Clean the inside parts with a cloth soaked in warm water.
If soapy water is used, wipe it off thoroughly with water.
Free standing type
Free standing type