Digital Acoustics IP7-SS20 Manuale introduttivo - Pagina 3

Sfoglia online o scarica il pdf Manuale introduttivo per Amplificatore Digital Acoustics IP7-SS20. Digital Acoustics IP7-SS20 4. Ip paging amplifier
Anche per Digital Acoustics IP7-SS20: Manuale di riferimento (20 pagine)

Stampa la pagina

TalkMaster

TalkMaster™ Server Software is a suite of Windows® based application

used to configure and manage Digital Acoustics IP7™ and ii3™ Intercoms

and Paging endpoints. Applications included with the TalkMaster Server are

the Admin Console for configuration of the Server and IP Endpoints and the

Operator Console for managing 2-way Intercom calls and 1-way Paging

announcements.

Please refer to the TalkMaster Admin Console Reference Manual on the

Software Installation CD for additional information software setup options

• Install the TalkMaster Software using the Digital Acoustics' Software CD

• Refer to the previous section to power up and connect the IP7 series

device to the network.

• Record the unique ID# from the bottom label of the IP Endpoint and note

the location where it will be installed

• Start the Admin Console and logon with an

Operator ID of admin and the default password

of admin

• Click the Settings → Endpoint

Defaults tab and make any

changes required for your

installation. For instance, if you

want to assign static IP

Addresses, uncheck the Assign

Automatically with DHCP

checkbox

•

Click the IP Endpoints tab and press the FIND ALL button in the lower

right hand corner of the screen. Newly discovered IP Endpoints appear in

the list

™ Software

• Click on the IP Endpoint to be configured (the "Icom ID" column must

match to the Intercom's previously recorded ID#)

• Click the Defaults button and enter a

descriptive name into the Location Name

field

• Make any other desired changes, then

select the Options 2 tab

• Check the Remote Listen Disable option (the SS20 does not support a

microphone, so the Operator Console should never go into Listen mode)

• Optionally, select the Paging Groups tab to include the SS20 into one or

more paging groups

Change additional IP7 Configuration Options and click SAVE when changes

have been completed

When all Admin Console changes have been completed, press the Update

Now button

Close the Admin Console

Start the Operator Console

• Logon with the assigned Operator ID and

Password or as the admin

• Specify the IP Address of the TalkMaster

Server (specify 127.0.0.1 if the Operator

Console is running on the TalkMaster

Server PC)

Page 3 of 4