Sharp Conference Series XG-PH80W-N Manuale di configurazione - Pagina 26
Sfoglia online o scarica il pdf Manuale di configurazione per Proiettore Sharp Conference Series XG-PH80W-N. Sharp Conference Series XG-PH80W-N 32. Projectors
Anche per Sharp Conference Series XG-PH80W-N: Opuscolo e specifiche (4 pagine), Scheda tecnica (4 pagine), Specifiche tecniche (2 pagine)
Stampa la pagina
Controlling the Projector via LAN
Making General Settings for
the Network
Enter "http://XXX.XXX.XXX.X/lanconf.
html" (for "XXX.XXX.XXX.X", enter the IP
address set by the procedure on page 22)
in "Address" on Internet Explorer (version
6.0 or later) using a computer on the
network to display the "Projector LAN
Confi guration" screen.
On this screen, you can make general
settings relating to the network.
■
DOMAIN
Items
Host Name
Setting a hostname.
Domain
Setting a domain name of the network
Name
connected to the projector.
■
MAIL
Items
Error Mail
Selecting "Enable" activates the Alert
Mail feature. When using a wired LAN,
your computer will receive an error
message via e-mail if the projector
lamp reaches the end of its lifetime or if
an error occurs in the projector.
Originator
Setting the projector's e-mail address.
Address
The e-mail address set here becomes
Originator E-mail Address.
SMTP Server Setting an SMTP server address for e-
mail transmission.
Recipient
Setting your recipient's address.
Address (1–3)
■
TEST MAIL
Click "Execute" to enable the TEST MAIL feature, which
allows you to send a test mail to confi rm that the
settings for e-mail transmission are properly made. Click
"Test Mail Status" to make sure that the test mail is sent
correctly.
■
PJLink
Items
PJLink
Selecting "Enable" allows you to set a
(Password)
password when using the PJLink
feature.
Password
Setting a password.
-26
Description
Description
Description
Note
•
When "DHCP Client" is set to "Off" on the
projector, IP address is 192.168.150.2. If you did
not change the IP address in "3. Setting up a
Network Connection for the Projector"
(pages 22-23), enter "http://192.168.150.2/
system.html".
•
You can input up to 60 characters.
•
You can input the characters below:
– Host Name and Domain Name: A-Z, 0-9, -
– Originator Address, SMTP Server and
Recipient Address: a-z, A-Z, 0-9, !, #, $, %, &,
*, +, -, /, =, ?, ^, {, |, }, ~, _, ', ., @, `
Confi rm that the values are set properly,
and then click the "Apply" button.