Sharp PG-D2710X Manuale operativo - Pagina 5

Sfoglia online o scarica il pdf Manuale operativo per Proiettore Sharp PG-D2710X. Sharp PG-D2710X 9. True xga data projector
Anche per Sharp PG-D2710X: Manuale di configurazione (26 pagine), Manuale rapido (2 pagine), Specifiche (2 pagine), Specifiche tecniche (2 pagine), Specifiche tecniche (2 pagine), Specifiche tecniche (2 pagine)

Stampa la pagina

1. Operation Manual

Using 3D Viewing Mode

Use the following procedure to project 3D images.

For operation of the projector, see the projector's operation manual.

For operation of the 3D LCD shutter glasses and the 3D-video playback equipment,

see the corresponding operation manual.

Projecting 3D images

Turn the projector on.

Turn the 3D-video playback

equipment on.

•

Set the 3D-video playback equipment

so that it outputs one of the signals

listed in the Compatibility Chart in this

operation manual.

Switch the Input mode of the

projector to enable input of 3D

video signals.

Operate the 3D-video playback

equipment and play back the 3D

content.

Turn the 3D LCD shutter glasses

on and place them over your eyes.

Press 3D MODE on the remote

control to display the 3D MODE

menu.

Info

•

If An invalid button has been

pressed. is displayed, a

3D-compatible signal is not being

input. Check the output signal on

the playback equipment.

/ buttons

ENTER button

3D MODE button

Press

to set DLP

On .

Press ENTER to switch the

mode and enable more natural

3D image viewing.

Warning

•

If the projector, 3D-video playback

equipment, and 3D LCD shutter

glasses are not properly set, you

may experience eye strain in

addition to not being able to view

the images in 3D.

Press 3D MODE.

•

The 3D MODE menu will disappear.

Note

•

If the images are not displayed in 3D, repeat

steps 6 to 8.

•

You can also use DLP

Link™ Invert on the menu screen to change

the 3D setting.

Ending 3D projection